为了能确保油箱的清洁度，建议采用以下步骤清洗：①打开液压油箱底部放油口

In order to ensure the cleanliness of the tank, recommended washing steps: ① open the discharge port clogging hydraulic tank bottom, discharge <br>system hydraulic oil contamination or deterioration of empty, open the mailbox cover → ② remove hydraulic line (in particular, the pump inlet tube Close the oil suction port ball valve → ③Close the oil discharge port at the bottom of the fuel tank, and pour 10Kg of cleaning agent into the fuel tank →④ Hold one end of the bamboo pole or wooden stick, and wrap the bamboo pole or wood with a white cloth The other end of the rod stirs the detergent poured into the fuel tank to clean the inner wall of the fuel tank → ⑤Open the oil drain blockage, after emptying the tank to wash the dirt, close the oil drain → ⑥ Pour the clean detergent 10Kg into the tank → ⑦So Repeat three times → ⑧ dry the oil tank → ⑨ fill the oil tank with new hydraulic oil

In order to ensure the cleanliness of the tank, it is recommended to use the following steps for cleaning: (1) open the hydraulic tank bottom drain blocked, row.<br>Air contamination or deterioration of the system hydraulic oil, open the mailbox cover , (2) remove the hydraulic lines (especially pump inlet lines), components (hydraulic pumps, motors), etc., close the suction valve , (3) close the bottom of the tank oil discharge, pour 10Kg cleaning agent into the tank , (4) hand holding bamboo poles or wood At one end of the stick, stir the cleaning agent poured into the tank with a white cloth, the inner wall of the tank, (5) the open oil blocked, drain the tank after washing the dirt, close the oil discharge, (6) pour in the cleaning agent 10Kg to the oil. In the box, (7) so repeated three times, (8) air-drying tank, (9) the tank filled with new hydraulic oil.

In order to ensure the cleanliness of the oil tank, the following steps are recommended for cleaning: ① open the drain hole at the bottom of the hydraulic oil tank to drain<br>For air polluted or deteriorated system hydraulic oil, open the tank cover → ② remove the hydraulic pipeline (especially the pump inlet pipeline), components (hydraulic pump, motor), etc., and close the ball valve at the oil suction port → ③ close the oil drain port at the bottom of the oil tank, and pour 10kg cleaning agent into the oil tank → ④ Hold one end of the bamboo rod or stick in hand, wrap the other end of the bamboo rod or stick with white cloth, stir and pour the cleaning agent into the oil tank to clean the inner wall of the oil tank → ⑤ open the oil drain plug, empty the oil tank to wash the dirt, and then close the oil drain port → ⑥ pour 10kg clean cleaning agent into the oil tank → ⑦ repeat this for three times → 8. Air dry the oil tank → Ⅸ fill the oil tank with new hydraulic oil