计算划擦过程中，划痕隆起量的统计结果如下表所示。划痕的隆起量在不同晶面

The statistical results of the amount of scratch uplift during the calculation of the scratch are shown in the table below. The uplift of scratches is different on different crystal planes and different crystal down. For the same crystal plane, the amount of uplift in the directions of 45 ° and 135 ° is low, and the amount of uplift is close and relatively high in the three directions of 0 °, 90 ° and 180 °. For different crystal planes, the more the crystal plane is toward the (111) plane, the amount of scratch bulge gradually decreases.

The statistical results of the scratch upduring during the calculation of the scratch are shown in the table below. The amount of bumps in scratches varies from surface to surface to crystal face. For the same crystal surface, the bulge is low at 45 degrees, 135 degrees, 0 degrees, 90 degrees, 180 degrees, and the bulge is close and relatively high. For different crystal surfaces, the more the crystal surface is biased towards the (111) surface, the amount of scratch escloser decreases gradually.

The statistical results of scratch protrusion during the calculation of scratch are shown in the table below. The amount of scratch bulge is different in different crystal surface and different crystal downward. For the same kind of crystal surface, the amount of uplift is low in 45 ° and 135 ° directions, and it is close and relatively high in 0 °, 90 ° and 180 ° directions. For different crystal faces, the more the crystal faces incline to (111) face, the less the scratch protrusion.<br>