1.现场检验人员检验结束后由二次抽检人员对已检验硅片进行100%全检。

1. After the inspection by the on-site inspectors, the second sampling inspectors will conduct 100% full inspection on the inspected silicon wafers. Before packaging and plastic packaging, perform a full inspection around the silicon wafers to avoid chipping and missing corners. Before packing, check the plastic packaging silicon wafers for four weeks to prevent abnormal packaging fragments from flowing into the client. The packaged silicon wafers are disassembled before the finished product is put into storage. Sampling inspection of the box, if an abnormal whole pallet is found, the whole pallet shall be isolated and re-inspected and then put into storage.

1. After the on-site inspection personnel, the second sampling personnel will conduct a 100% full inspection of the silicon wafers that have been inspected. Packaging plastic seal before the silicon chip around the full inspection, to avoid the collapse edge missing angle leakage, before boxing on the plastic sealed silicon chip full inspection around, to avoid packaging pressure debris abnormal flow into the client, the finished product before the storage of packaged silicon wafers for unboxing, found abnormal whole isolation re-inspection qualified after storage.

1. After the inspection by the on-site inspection personnel, the secondary sampling inspection personnel shall conduct 100% full inspection on the inspected silicon wafers. Before packaging and plastic packaging, conduct a full inspection around the silicon wafer to avoid edge chipping, missing corners and leakage. Before packaging, conduct a full inspection around the silicon wafer to avoid abnormal package pressure fragments flowing into the client. Unpack and sample the packaged silicon wafer before the finished product is put into the warehouse. If any abnormal condition is found, isolate it and put it into the warehouse after re inspection.