1、已和R&D进行沟通，更改为快插结构后此处经常转向长期易造成磨损损坏

1, and R & D has to communicate changes to the structure here often push towards longer-term wear damage easily lead seal, and the gas chamber is a part of the axle structure lie can not be changed fast search, and the high cost can not be changed <br>2, the assembly setting spanner needs investigation, and escalate purchasing needs, is now required to verify <br>3, the production line according to claim tightening process, debugging tool 100% of the process according to the standard check here

1, has communicated with the R-D, changed to the fast-inserted structure here often turn to long-term easy to cause wear damage sealing, and some axle air chamber for the lying structure can not be changed quickly, and the cost can not be changed<br>2, the total assembly check fixed value wrench demand, and report the demand for procurement, is now in the verification needs<br>3, the production line in accordance with the requirements of the process tightening, commissioning workers in accordance with the process standard 100% of this inspection

1. Communication with R & D has been carried out. After the quick plug structure is changed, it is often turned here for a long time, which is easy to cause wear and damage the tightness. Moreover, some axle air chambers are lying structure, which can not be changed, and the cost is high, which can not be changed<br>2. The final assembly checks the requirements of the constant value wrench, and submits the requirements for purchase. Now, the requirements are being verified<br>3. The production line shall be tightened according to the process requirements, and the debugging worker shall check the place 100% according to the process standard<br>