2,建立颜色件GA复检质量门3,重新明确颜色件评价边界4,按装配区域网

2. Establish a GA re-inspection quality gate for color parts. <br>3. Re-define the evaluation boundary of color parts. <br>4. Grid management and control according to the assembly area. <br>5. Set up a joint inspection team for color parts and non-color parts. Complete coverage once a week, and output evaluations to form a ledger tracking improvement effect on the problem points; <br>6. Painting stationed in the final assembly quality door: starting from May 2021, the project meeting resolution will be passed and the second coating quality inspection door will be initiated , Give priority to the second re-inspection of scratched high-frequency color parts in the final assembly and sub-assembly area; <br>7. Organize all relevant evaluation links to review the current color parts, re-standardize the color parts evaluation boundary, and sign on the spot; <br>8. Yes The parts and components covered by the project are managed and controlled in a grid-based manner to ensure that each part has a responsible person for raw materials, loading, and mutual inspection;

2. Establish GA re inspection quality gate for color parts<br>3. Redefine the evaluation boundary of color parts<br>4. Grid control by assembly area<br>5. Set up joint inspection teams for color parts and non color parts respectively, fully cover all appearance parts in the production process once a week, output evaluation, form a standing book for problem points, and track the improvement effect;<br>6. Quality gate of coating resident in the final assembly: since May 2021, through the resolution of the project meeting, start the secondary re inspection quality gate of coating, and give priority to the secondary re inspection of scratched high-frequency color parts in the final assembly sub assembly area;<br>7. Organize relevant evaluation links to review the color parts at this stage, re standardize the evaluation boundary of color parts, and sign on site for implementation;<br>8. Carry out regional grid management and control on the parts covered by the project to ensure that each part has a person in charge from incoming material, loading and mutual inspection;<br>

2. Establish the quality gate of color parts GA re-inspection. 3. Re-define the evaluation boundary of color parts. 4. Grid control according to assembly area. 5. Set up joint inspection teams for color parts and non-color parts respectively, cover all appearance parts in the production process once a week, and output evaluation, so as to form a ledger tracking improvement effect for problem points; 6. Painting in the quality gate of final assembly: Since May 2021, through the resolution of the project meeting, the quality gate of secondary re-inspection of painting will be started, and the secondary re-inspection will be given priority to the scratched high-frequency color parts in the final assembly and sub-assembly area; 7. Organize all relevant evaluation links to review the color parts at present, re-standardize the evaluation boundary of color parts, and sign on site for implementation; 8. Carry out grid management and control on the parts covered by the project in different regions to ensure that there are responsible persons for each part from material, loading and mutual inspection;