1、针对边沿，边角加强装配过程防护；2、维护配送工装防护胶墩3、加强班

1. Strengthen assembly process protection for edges and corners; <br>2. Maintain and distribute tooling protective rubber piers. <br>3. Strengthen squad leader inspections, and notify dynamic inspectors to check on and off operation specifications simultaneously; <br>4. Strengthen pre-process control capabilities, static Add self-inspection items before commissioning and go online. <br>5. Strengthen the self-inspection of the sub-assembly process, and strictly implement the "three noes" principle for the parts <br>. 6. Adjust the flat gasket to reverse the installation and use the arc surface to contact the paint surface; <br>7. Replace the protective rubber block ; <br>8. parts feedback problems increase the sampling frequency outside the subject

1. Strengthen the protection of edges and corners during assembly;<br>2. Maintenance and distribution of tooling protective rubber pier<br>3. Strengthen the patrol inspection of the team leader, and simultaneously notify the dynamic inspector to inspect the boarding and alighting operation specifications;<br>4. Strengthen the control ability of pre sequence links, and add self inspection items before static commissioning<br>5. Strengthen the self inspection in the sub assembly process and strictly implement the "three noes" principle for the parts<br>6. Adjust the reverse installation of the flat pad, and use the arc surface to contact the paint surface;<br>7. Replace the protective rubber block;<br>8. Feed back the external inspection of parts and components, and increase the sampling inspection frequency

1. Strengthen the protection of assembly process for edges and corners; 2. Maintain the protective rubber pier of distribution tooling. 3. Strengthen the patrol of the monitor and notify the dynamic inspector to check the operation specifications of getting on and off the bus; 4. Strengthen the control ability of pre-sequence links, and add self-inspection items before static debugging goes online. 5. Strengthen self-inspection in the packaging process, and strictly implement the principle of "three noes" for this part. 6. Adjust the flat pad to be reversed, and use the arc surface to contact with the paint surface; 7. Replace the protective rubber block; 8. Increase the frequency of random inspection by feedback external inspection of parts and components.