使用储能电感目的在于，在功率开关管截止时，为负载存储能量，电气上的作用

The purpose of using energy storage inductance is to store energy for the load when the power switch is off. The electrical function is to integrate the square wave pulse of the switch into a DC voltage. The magnet designed for this energy storage inductor requires an operating frequency of 100 kHz, a DC resistance of less than 0.1 ohms, and a saturation current of more than 0.5A. Need to wind by yourself, the required minimum inductance value can be calculated by the formula:

The purpose of using energy storage inductors is to store energy for the load when the power switch tube is cut off, and the electrical effect is to integrate the switching square wave pulse into DC voltage. The magnet requirement for energy storage inductors is 100 kHz, DC resistance is less than 0.1 euros, and saturation current is greater than 0.5A. The minimum inductor value required can be calculated by the formula if it needs to be rotated by itself:

The purpose of using the energy storage inductor is to store energy for the load when the power switch is cut off. The electrical function is to integrate the square wave pulse of the switch into the DC voltage. In this design, the magnet of the energy storage inductor is required to have a working frequency of 100 kHz, a DC resistance of less than 0.1 ohm and a saturation current of more than 0.5A. The required minimum inductance can be calculated by the formula:<br>