1、零部件厂家将前悬气囊本体盖板由机加工一体式盖板改为焊接一体式盖板（

1. The component manufacturers changed the front suspension airbag body cover from a machined integrated cover to a welded integrated cover (the design has not been changed), resulting in the airbag being clamped by the inner cavity cover when the airbag is not inflated. The cavity cover is deformed and cannot be sealed, causing air leakage of the airbag body of the front suspension; <br>2. The airbag trachea joint is uneven, resulting in air leakage after being inserted in place according to the marking; <br>3. It is difficult to insert the air pipe on the valve body of the A1331 manufacturer , Normal force insertion cannot be inserted into place (see video attachment); <br>4. At present, there are differences in the structure of the front suspension airbag regulating valve of the two suppliers, and the difference in insertion depth is about 10mm.

1, parts manufacturers will be the front suspension air bag body cover plate from machined one-size-all cover plate to welding one-in-one cover plate (design has not changed), resulting in the air bag in the unolucted when the sac skin is clamped by the inner cavity cover plate, the inner cavity cover deformation can not be sealed, resulting in the front suspension air bag body leakage problem;<br>2, the airbag air pipe connector is uneven, resulting in according to the marking inserted into the bit after the existence of gas leakage problems;<br>3, A1331 manufacturer valve body plug tracheal difficulties, normal force plug can not be plugged into place (see video attachment);<br>4, the current two suppliers before the suspension valve structure is different, can be inserted depth difference of about 10mm.

1. The parts manufacturer changed the cover plate of front suspension airbag body from machining integrated cover plate to welded one-piece cover plate (the design has not been changed), resulting in the bag skin being clamped by the inner cavity cover plate when the airbag is not inflated, and the inner cavity cover plate is deformed and unable to seal, resulting in air leakage of the front suspension airbag body;<br>2. The uneven joint of the air bag tube leads to air leakage after being inserted into place according to the marking;<br>3. The valve body of a1331 manufacturer is difficult to insert into the air pipe, and cannot be inserted in place with normal force (see video attachment);<br>4. At present, there are differences in the structure of front suspension air bag regulating valve between the two suppliers, and the difference of insertion depth is about 10 mm.<br>