超级脱硫反应器参考图问题：1. 参考图搅拌支撑件尺寸不全（1）上封头支

Referring to FIG super desulfurization reactor problems: <br>1. The size of the support is stirred with reference to FIG insufficiency <br>head supporting flange thickness and the cylinder section (1), the size of the support ribs; <br>stirred size shutter (2) within the barrel; <br>(3) tube head support member under in vivo insufficiency size (plate size and the large arc-like 2 three sheet width and thickness of the vertical standpipe in the AA size); <br>(4) an agitator type, speed and power. <br>2. To confirm AG-303 ab information C3544-D366ADSTrev2 tender in terms AGITATOR ASSEMBLY weight 5760kg, is a single or two heavy total weight? <br>3. 1CN nozzle diameter of DN40, measuring the difference between the weld and 50mm, which is inclined nozzle in close proximity to the weld will not open in the drawing, can then be moved downwardly 1CN spout 50mm to avoid weld? <br>4. The domestic central support leg calculated diameter 2140mm (see annex), the base value field diameter of 2630mm large difference.

Super desulfurizer reference graph questions:<br>1. Reference diagram stirring support is not fully sized<br>(1) the upper head support flange and barrel section thickness, support the size of the rib plate;<br>(2) the size of the stirring bezel in the barrel;<br>(3) The size of the lower cap support piece in the barrel body is incomplete (A-A arc plate size and large sample 2 in the width and thickness of the three standplate, vertical tube size);<br>(4) Mixer model, speed and power.<br>2. Need to confirm AG-303 ab data C3544-D366 ADSTrev2 tender IN THE UNITED SUBOASSEMBLY item weight 5760kg, is a single weight or 2 weight?<br>3. 1CN tube diameter is DN40, in the drawing to measure the difference between it and the weld 50mm, it is the oblique tube mouth will be closer to the weld is not good opening, can 1CN tube port down another 50mm to avoid welding?<br>4. According to the domestic support calculated the diameter of the leg center is 2140mm (see annex), and the site 2630mm diameter of the base value is a big difference.

Problem of reference diagram of super desulfurization reactor:<br>1. The dimension of mixing support is incomplete in the reference drawing<br>(1) thickness of upper head support flange and barrel section, size of support rib plate;<br>(2) size of mixing baffle in the cylinder;<br>(3) the size of the supporting parts of the lower head in the cylinder body is incomplete (the size of the arc plate in A-A, the width and thickness of the three vertical plates in detail 2, and the size of the vertical tube);<br>(4) mixer model, speed and power.<br>2. It is necessary to confirm whether the weight of agent assembly in c3544-d366adstrev2 tender of ag-303 AB data is 5760kg, single weight or two sets of common weight?<br>3. The pipe diameter of 1cn nozzle is Dn40, and the difference between it and the weld is 50 mm measured on the drawing. It is difficult to open the inclined nozzle close to the weld. Can the 1cn nozzle be moved down another 50 mm to avoid the weld?<br>4. According to the calculation of domestic support, the center diameter of outrigger is 2140mm (see the attachment), which is quite different from the foundation value of 2630mm diameter on site.<br>