电机拆解机是采用物理方法无害化拉取电机定子中铜线的资源回收设备。电机拆

The motor dismantling machine is a resource recovery equipment that uses physical methods to harmlessly pull the copper wires in the motor stator. <br>The motor dismantling machine is to place the motor stator with copper coil after cutting and cutting on the lifting platform, and control the motor stator to rise to the positioning plate through a manual switch, and the positioning plate limits the motor stator position, and then through the foot switch Control the pliers to bite the copper coil with the jaws, and pull the copper coil out of the stator to complete the disassembly of the stator. A large amount of valuable copper wires are cleanly separated from a pile of scrap metal and plastic, and customers can recycle copper coils and stator cores according to actual conditions.

The motor disassembler is a resource recovery equipment that uses the physical method to harmlessly pull the copper wire in the motor seth.<br>The motor disassembler is to cut and also with copper coil motor station on the lifting table, through the manual switch control motor station rose to the positioning plate, from the positioning plate to the motor station limit, and then through the foot switch control pull pliers to let the jaw bite the copper coil, the copper coil from the inside of the sting, so as to complete the disassembly of the sting. A large number of valuable copper wires are cleanly separated from a pile of scrap metal and plastic, allowing customers to recycle copper coils and styrofounded cores according to the actual situation.

Motor dismantling machine is a kind of resource recovery equipment which uses physical method to draw copper wire in motor stator harmlessly.<br>The motor dismantling machine is to put the motor stator with copper coil after cutting on the lifting table, control the motor stator to rise to the positioning plate by manual switch, limit the motor stator by the positioning plate, and then control the pulling clamp by foot switch to make the tongs bite the copper coil and pull the copper coil out from the stator, so as to complete the stator disassembly. A large amount of valuable copper wire is separated from a pile of scrap metal and plastic, and the customer can recycle the copper coil and stator core according to the actual situation.<br>