针对问题分析进展，需终检留故障车进行分析。终检7月24日前100%留故

In view of the progress of problem analysis, it is necessary to leave the faulty vehicle for final inspection for analysis. <br>For final inspection, 100% of the faulty vehicles will be retained before July 24, and the external inspection department will be notified to analyze and <br>require the quality door to find problems 100% to pull the external inspection department to analyze. <br>The vehicle needs to be re-reserved for analysis (Towing-4259) <br>Final inspection. The problem is recorded. The relevant faulty vehicle is analyzed. The <br>tractor is analyzed for the problem of the tractor. The <br>final inspection of the wiper arm water pipe and the spray hose is required to record the <br>quality door separately . 100% pull the external inspection department for analysis. <br>"Pull the designer to review the connectors. <br>"The <br>batch verification measures are invalid and need to re-analyze and formulate measures. <br>The external inspection department is required to compare the contours of the problematic parts according to different suppliers. <br>According to the design requirements, the final assembly requires the use of fixed-torque electric tools to assemble the steering shield for a week as a verification of the torque effect. <br>The final assembly is required to implement the <br>test assembly of the steel joint torque requirements . The design is required to immediately issue a modification order under the trial assembly state, and the work-in-progress is required to be restructured before July 31. <br>Technically evaluate whether the work-in-progress can be restructured, and clarify the time for issuing the restructuring order

In view of the progress of problem analysis, it is necessary to finally check the faulty vehicle for analysis.<br>Final inspection before July 24 100% left the faulty car, notify the external inspection section analysis.<br>Requires the quality door to find the problem 100% pull the external inspection department for analysis.<br>Car retention needs to be re-parked for analysis (tow-4259)<br>Final inspection for the problem record left the relevant fault vehicle analysis.<br>For the tractor problem to stay analysis.<br>For the wiper arm water pipe and spray hu pipe requirements for the final inspection recorded separately.<br>Requires the quality door to find the problem 100% pull the external inspection department for analysis.<br>"Pull the designer to review the insert.<br>"<br>Bulk verification measures are ineffective and need to be reanalyzed and developed.<br>The external inspection department is required to compare the contours of the problem site according to different suppliers.<br>According to the design requirements, the assembly needs to be installed for a period of one week using fixed-twisting power tools to assemble the steering shell as a verification of torque effects.<br>The assembly is required to implement the steel joint torque requirement.<br>Samplehas have been tested, requiring the design immediately according to the test-load editing state issued a change order, and require in the product modification, before July 31 to reflect.<br>Technical assessment of whether the work in progress can be modified, and clearly change the time of the single issue.

In view of the progress of problem analysis, it is necessary to retain the fault vehicle for analysis.<br>Leave 100% of the fault vehicles before July 24, and inform the external inspection department for analysis<br>The quality department is required to pull the external inspection department to analyze the problems found.<br>Need to retain the vehicle for analysis (traction-4259)<br>The final inspection records the problems and leaves relevant fault vehicles for analysis<br>Analyze the problem of tractor retention<br>Final inspection records are required for wiper arm water pipe and sprinkler hose<br>The quality department is required to pull the external inspection department to analyze the problems found.<br>"Pull the designer to review the connector.<br>"<br>If the batch verification measures are invalid, they need to be re analyzed and formulated.<br>The external inspection department is required to compare the profile of the problem parts according to different suppliers.<br>According to the design requirements, the final assembly is required for one week, and the fixed torque electric tool is used to assemble the steering case as the verification of torque influence.<br>The final assembly is required to implement the torque requirements of steel joint<br>After the trial assembly of the sample has been completed, it is required that the design issue a change order immediately according to the trial assembly status, and require the product to be reformed and reflected before July 31.<br>Technical evaluation on whether WIP can be restructured and the issuing time of the change order shall be made clear<br>