由于BA7来车尾灯间隙左小右大，需要将左主尾灯向外，导致尾灯与后杠错位

由于BA7来车尾灯间隙左小右大，需要将左主尾灯向外，导致尾灯与后杠错位<br>2.由于后盖变形，导致后盖与后杠平度左右不均，终检调整后杠平度时导致尾灯与后杠错位<br>措施/Massnahme：<br>1.尾灯精调工位调整尾灯时，兼顾与后杠齐平线<br>2.终检返修后杠与后盖平度时，兼顾尾灯与后盖齐平线进行调整

Since the gap between the tail lamps of ba7 incoming vehicles is small on the left and large on the right, it is necessary to turn the left main tail lamp outward, resulting in the dislocation of the tail lamp and the rear bar<br>2. Due to the deformation of the rear cover, the flatness of the rear cover and the rear bar is uneven from left to right. During the final inspection and adjustment of the flatness of the rear bar, the tail lamp and the rear bar are misaligned<br>Measures / massnahme:<br>1. When adjusting the tail lamp at the tail lamp fine adjustment station, take into account the flush line with the rear bar<br>2. After final inspection and repair, adjust the flatness between the rear bumper and the rear cover by taking into account the flush line between the tail lamp and the rear cove

As the gap between the tail lights of BA7 incoming car is small on the left and large on the right, it is necessary to turn the left main tail lights outward, resulting in the dislocation of the tail lights and the rear bumper. 2. Due to the deformation of the rear cover, the flatness of the rear cover and the rear bumper is uneven from left to right, and the tail light and the rear bumper are misplaced when adjusting the flatness of the rear bumper in the final inspection. Action /Massnahme: 1. Tail light fine adjustment station When adjusting the tail light, give consideration to the flush line with the rear bumper. 2. When the flatness of the rear bumper and the rear cover is repaired in the final inspection, the tail light and the rear cover should be adjusted at the same level.