手握牙颌看准前后方向，及上下牙颌。牙颌背面两个限位孔对准定位销。靠近定

Hold the teeth and look at the front and rear directions, as well as the upper and lower teeth. <br>The two limit holes on the back of the teeth and jaws are aligned with the positioning pins. When approaching the positioning pin and the position of the magnet, the jaw will automatically attract. <br>Hold both sides of the jaw with your hands and apply a little force to remove the jaw.

Hold the teeth and jaw, and see the front and rear direction, as well as the upper and lower teeth and jaw.<br>Two limit holes on the back of the tooth and jaw align the positioning pin. When it is close to the locating pin and magnet, the jaw will automatically absorb it.<br>Hold both sides of the teeth and jaws with your hands. If you exert a little force, you will take them down.

Hold the jaw and look at the front and back direction, and the upper and lower jaws. Two limit holes on the back of the jaw are aligned with the positioning pin. When approaching the positioning pin and magnet position, the jaw will automatically suck. Hold both sides of the tooth and jaw with your hands, and with a little force, the tooth and jaw will be removed.