针对外闪问题在南广场留3台故障车拉动外检科进行分析针对车门玻璃升降异响

For lay out three issues remain in the South Plaza fault car pull external examination department to analyze <br>movements abnormal noise problem for the glass door to be left censoring fault car to analyze <br>tissue suppliers of parts improved small batches of test equipment <br>for different supply The bumpy road test of commercial parts is carried out to <br>confirm whether the state of the incoming parts is consistent with the state of the technical seal. <br>According to the design requirements, the final assembly needs to be assembled with a fixed-torque electric tool for a week to assemble the steering shield as a verification of the torque effect. <br>Sort out the scratched parts of the instrument panel, analyze the cause of the scratches <br>, organize the purchasing department, technical center, and quality personnel to review the problems of electrical plug-in parts such as outline lights. <br>Organize technical center and quality personnel to evaluate the state of assisting operation with both hands when inserting the oil dipstick of Mercedes-Benz models.

For the problem of flashing in the South Square left 3 faulty cars pull external inspection section for analysis.<br>The problem of door glass lifting and noise needs to be analyzed by the terminal inspection and retention of the faulty vehicle.<br>Organize suppliers to provide improved components for small batch commissioning.<br>Bump tests for different supplier components.<br>Whether the implementation of the incoming status is consistent with the technical seal ingress status.<br>According to the design requirements, the assembly needs to be installed for a period of one week using fixed-twisting power tools to assemble the steering shell as a verification of torque effects.<br>Comb the scratch site of the instrument table and analyze the cause of the scratch.<br>For the profile lamp and other electrical plug-in problems to organize procurement department, technology center, quality personnel to review.<br>Organization technology center, quality personnel to the Mercedes-Benz model oil ruler insertion needs to be two-hand auxiliary operation status assessment.

Aiming at the problem of external flash, three faulty vehicles were left in the South Square to pull the external inspection department for analysis<br>In view of the abnormal noise caused by the door glass lifting, it is necessary to retain the fault vehicle for analysis<br>Organize suppliers to provide improved parts for small batch trial assembly<br>Bumpy road test for parts from different suppliers<br>Whether the status of incoming parts is consistent with that of technical sealing sample<br>According to the design requirements, the final assembly is required for one week, and the fixed torque electric tool is used to assemble the steering case as the verification of torque influence.<br>The scratch parts of the instrument panel were sorted out, and the causes of the scratch were analyzed<br>Organize the purchasing department, technical center and quality personnel to review the problems of electrical connectors such as outline lights.<br>Organize technical center and quality personnel to evaluate the condition of manual operation when inserting oil dipstick of Benz model.<br>