您好，我是陈小姐，也可以叫我KOKO.之前一直有在微信群上联系的。在收

Hello, I am Miss Chen, you can also call me KOKO. I have been in contact on the WeChat group before. <BR>After receiving your feedback, we organized a discussion with the master: <BR>1. We also found it strange that we have tested and assembled each shelf during production, and there is no problem of crookedness and shaking as you said. <BR>2. It is possible After adding the glass laminate, the increased force causes unevenness. That's because the shelf structure is too high. <BR>3. If you produce similar shelves in the future, the master will provide suggestions for improvement. Please refer to this. This is a more beautiful and can improve the shaking method. Lock the L-shaped triangle under the fixed frame. See the attached picture for details. <BR>4. If agreed, these L-shaped triangles can be added to the previous shelf, but you can only drill holes and lock them on the original shelf on site. <BR><BR>I hope the above suggestions can help you. If your designer has better suggestions, please share with me, I will continue to follow up, thank you!

Hello, I'm Miss Chen, and you can call me KOKO. I've been in contact with WeChat groups before.<BR>After receiving your feedback, organize a discussion with the chef:<BR>1, we also feel more strange, each shelf in production we have test assembly, and you do not say crooked, shaking problems.<BR>2, it is possible to increase the glass plate after the increase in force caused by uneven. That's because the shelf structure is too high.<BR>3, follow-up if the production of similar shelves, master to provide improvement advice, please refer to, this is more beautiful and can improve the shaking method, in the fixed skeleton under the lock L-shaped triangle, see the drawings.<BR>4, if you agree, the previous shelves can add these L-shaped triangles, but you can only in the field on the original shelf processing drill hole locking.<BR><BR>The above suggestions hope to help you, if your designers have better suggestions, please share with me, I will continue to follow up, thank you!

Hello, I am Miss Chen. I can also call me koko. I have been in contact with wechat group before.<BR>After receiving your feedback, the teacher organized a discussion:<BR>1. We also find it strange that every shelf is assembled by testing and assembling, and there is no problem of skew and shaking you say<BR>2. It is possible to increase the stress of glass laminate and cause instability. That's because the shelf structure is too high.<BR>3. If the similar shelves are produced later, the master provides improvement suggestions. Please refer to the method which is more beautiful and can improve shaking. Add L-shaped triangle under the fixed frame. See the attached figure for details.<BR>4. If agreed, the previous shelves can add these L-shaped triangulations, but you can only process the holes in the original shelves on the site to lock.<BR>The above suggestions hope to help you. If your designers have better suggestions, please share with me, I will continue to follow up, thank you!