5.拼板印刷：根据当班组长的生产计划安排进行到烘板处领取烘好的FPC，

5. Panel printing: According to the production plan of the team leader, collect the baked FPC at the baking board, pick up the solder paste at the picker, check the 5S around the equipment before production, check the material number, program name, and program parameters In the production process, regularly check whether the production parameters and equipment operation conditions are within the scope of the file requirements; carry out the puzzle operation according to the SOP requirements. If the equipment alarm occurs during the production process, the equipment alarm reason should be checked immediately and targeted treatment confirmation If a specific abnormal cause cannot be determined, it should be reported to the immediate supervisor immediately; when an item number is about to be cut into another item number, the immediate supervisor or on-site dispatcher will be notified one hour in advance to prepare for the production of another item number.

5. Plate printing: according to the team leader's production plan arrangements to the baking plate to collect baked FPC, to the receiver to collect the paste, pre-production inspection equipment around 5S, check the material number, program name, procedure parameters, the production process regularly check the production parameters, equipment operation is within the scope of the document requirements; If there is no specific abnormal cause, should be immediately reported to the immediate superior, is about to complete a material number needs to be cut into another number, one hour in advance to inform the immediate superior or on-site mixer to carry out additional material number production preparation.

5. Panel printing: according to the production plan of the team leader on duty, collect the baked FPC at the baking board, solder paste at the picking man, and check the 5S around the equipment before production, Check the material number, program name and program parameters, and regularly check whether the production parameters and equipment operation are within the scope required by the documents during the production process; carry out panel splicing according to the SOP requirements. In the production process, if the equipment alarm occurs, immediately check the reason for the equipment alarm and carry out targeted processing and confirmation. If the specific abnormal reason cannot be determined, it is necessary to When reporting to the immediate supervisor immediately; when a material number needs to be cut into another material number, inform the immediate supervisor or field dispatcher one hour in advance to prepare for production of another material number.<br>