2017年底导入柔性产品，不良高达25%，为蒸镀膜层异常导致，公司成立

Introduced flexible products at the end of 2017, and the defects were as high as 25%, which was caused by the abnormality of the deposited film. The company established a special team to improve the problems. As the general manager of the OLED center, he was responsible for the optimization of process parameters and the formulation of various experimental plans, as well as poor analysis <br>. , FIB analysis, experimental plan development

At the end of 2017 to import flexible products, bad up to 25%, for the steam coating layer abnormal cause, the company set up a special team to improve the problem, as the total head of the OLED center responsible for process parameter optimization and all kinds of experimental planning and poor analysis<br>Optimize process parameters, bad analysis, FIB analysis, experimental planning

At the end of 2017, flexible products were introduced, and the defects were as high as 25%. Due to the abnormal evaporation coating layer, the company set up a special team to improve the problems. As the general director of OLED center, the company was responsible for the optimization of process parameters, the formulation of various experimental plans and the analysis of defects<br>Optimize process parameters, defect analysis, FIB analysis, experiment plan making