8.检验完成注意事项：8.1 测试完成后需要把工装卸下，不可遗留在PO

8. Precautions for inspection completion: <br>8.1 After the test is completed, the tooling needs to be unloaded and cannot be left in the POS machine, such as SIM card, SAM card, IC card, magnetic card, etc., to restore to the state before unpacking. <br>8.2 During the test, the security registers of the POS machine must not be cleared, and shipments must not be arranged. <br>8.3 Check and clean the appearance of the product and restore it to the state before unpacking. <br>8.4 After completion, put the product back into the box and check that the accessories are complete and confirm the consistency of the box (box) machine.

8. Precautions for inspection completion:<br>8.1 After the completion of the test, the tooling needs to be removed and must not be left in the POS machine, such as SIM card, SAM card, IC card, magnetic card, etc., to return to the pre-package state.<br>8.2 The testing process shall not remove the safety registers of the POS machine, and shall not carry out shipping finishing.<br>8.3 Check and clean the exterior surface of the appliance and return to the state it was in before unpacing.<br>8.4 After completion of the product back to the box and check the complete accessories, confirm the box (box) machine consistency.

8. Precautions for inspection completion:<br>8.1 after the completion of the test, the workers shall be unloaded, and shall not be left in the POS machine, such as SIM card, Sam card, IC card, magnetic card, etc., and be restored to the state before unpacking.<br>8.2 during the test, it is not allowed to clear the safety register of POS machine and to arrange the shipment.<br>8.3 check and clean the appearance and surface of the product, and return to the state before unpacking.<br>8.4 after completion, put the product back into the packaging box, check the completeness of accessories and confirm the consistency of box (box) machine.<br>