附件是第3版CAD图纸，请评论。 有几个关于尺寸意见没有采纳，说明如下

Attached is the third version of the CAD drawing, please comment. <br><br>There are a few observations about the size not adopted, as follows: <br><br>1, all the fixing anchor, manufacturers that "D + 160mm" is the minimum design dimension; <br><br>2, related to the height of 100mm tank no adjustment, because the die head related thereto; <br><br>3, the red mark R-311 baffle "003" I do not know what is meant, to the baffle angle is 30 degrees; <br><br>. 4, TK-372 and its related mold, the diameter can not adjust; <br><br>. 5, the inspection port 702 to V-515mm , from the stand too close, inconvenient disassembly, it is recommended not to change.

The attachment is the 3rd edition of CAD drawings, please comment.<br><br>Several views on dimensions were not adopted, as described below:<br><br>1, all anchor fixed, manufacturers think that "D-160mm" is the smallest design size;<br><br>2, tank height size related to 100mm did not adjust, because of its head mold related;<br><br>3, R-311 bezel red mark "003" do not know what meaning, bezel angle is changed to 30 degrees;<br><br>4, TK-372 and its mold-related, diameter size can not be adjusted;<br><br>5, V-702 inspection port changed to 515mm, too close to the bracket, inconvenient to disassemble, it is recommended not to change.

Attached is CAD drawing version 3, please comment.<br>There are several opinions on dimensions that are not adopted, as follows:<br>1. For all anchor fixation, the manufacturer considers "D + 160mm" as the minimum design size;<br>2. There is no adjustment for the height dimension of the tank 100mm, because it is related to the head mold;<br>3. The red mark "003" on the r-311 baffle does not know what it means, and whether the baffle angle is changed to 30 degrees;<br>4. Tk-372 is related to its mold, and the diameter and size cannot be adjusted;<br>5. The v-702 inspection port is changed to 515mm, which is too close to the bracket to be disassembled, so it is not recommended to change it.