墙模板安装基层找平后，粘贴海绵条，模板下端应与事先做好的定位基准靠紧，

After the wall template is installed and leveled, paste the sponge strip. The lower end of the template should be close to the pre-made positioning datum to ensure the correct position of the template and prevent the bottom of the template from leaking. Before continuing to install the template on the outer wall, set the template support pad belt. And correct its straightness.

Wall template installation grass-roots leveling, paste sponge strip, the lower end of the template should be close to the pre-done positioning benchmark, to ensure that the template location is correct and prevent the bottom of the template leakage, before the outer wall continues to install the template, to set the template support pad belt, and correct its straightness.

After the wall formwork is installed and leveled at the base, the sponge strip shall be pasted, and the lower end of the formwork shall be close to the positioning datum made in advance, so as to ensure the correct position of the formwork and prevent the mortar leakage at the bottom of the formwork. Before the external wall continues to install the formwork, the formwork support pad belt shall be set and its straightness shall be corrected.<br>