根据现行勘察规范的有关规定及本工程特点，本次勘察采用钻探取土、标准贯入

According to the provisions of the existing investigation the present specification and engineering characteristics, this earth drilling survey using Standard Penetration Test, Cone Penetration Test static indoor soil test and the like methods. <br>The holes were laid exploration 6, wherein the through hole dug + 3 standard, static sounding holes 3, hole depth 60m. Exploration hole arrangement, see "Building and FIG plane location survey points."

According to the relevant provisions of the current survey specifications and the characteristics of the project, this survey is carried out by means such as drilling and extraction of soil, standard penetration test, static touch test and indoor geotechnical test.<br>This time a total of 6 exploration holes, of which take soil and standard hole 3, static touch hole 3, hole depth of 60m. The layout of the exploration hole is shown in the "Building and Exploration Point Plan".

According to the relevant provisions of the current survey specifications and the characteristics of the project, the methods of drilling and soil sampling, standard penetration test, static penetration test and indoor geotechnical test are adopted in the survey.<br>There are 6 exploration holes arranged in this time, including 3 soil sampling + standard penetration holes, 3 static penetration holes, and the hole depth is 60m. The layout of exploratory holes is shown in the plan of buildings and exploratory points.