电机拆解机是采用了物理方法无害化处理电机定子的资源回收设备。电机拆解机

The motor disassembly machine is a resource recovery equipment that uses a physical method to harmlessly treat the motor stator. The motor disassembly machine first puts the motor stator on the support column, and the motor stator is positioned by the copper cutting positioning plate, and one of the foot switches is used to control the cutter to cut the copper coil of the motor stator. <br>Place the motor stator with copper coils after cutting and cutting on the lifting platform, control the motor stator to rise to the positioning plate through the manual switch, and limit the position of the motor stator by the positioning plate, and then control the tongs by the foot switch Bite the copper coil and pull the copper coil out of the stator to complete the disassembly of the stator. Users can recycle copper coils and stator cores according to actual conditions.

Motor disassembler is a resource recovery equipment that uses physical methods to harmlessly treat motor seths. The motor disassembler first places the motor station on the support column, and positions the motor station by the chopping copper positioning plate, and controls the cutter to cut off the copper coil of the motor station through one of the foot switches.<br>After cutting and also with copper coil motor station on the lifting table, through the manual switch control motor station rose to the positioning plate, from the positioning plate to the motor station limit, and then through the foot switch control pull pliers to let the jaw bite the copper coil, the copper coil pulled out from the inside of the sting, thereby completing the disassembly of the sting. The user can recover the copper coil and the stethon core according to the actual situation.

Motor dismantling machine is a kind of resource recovery equipment which uses physical method to treat motor stator harmlessly. The motor disassembly machine first places the motor stator on the support column, and the motor stator is positioned by the copper cutting positioning plate, and the copper coil of the motor stator is cut off by the cutter controlled by one of the foot switches.<br>After cutting, the motor stator with copper coil is placed on the lifting platform. The motor stator is controlled to rise to the positioning plate by manual switch. The positioning plate limits the motor stator, and then the clamp is controlled by the foot switch to make the tongs bite the copper coil and pull the copper coil out of the stator to complete the stator disassembly. Users can recover copper coil and stator core according to actual situation.<br>