1、接通电源、检查各部位运行是否正常，正常后关闭电源。 2、通过变频器

1. Turn on the power, check whether each part is operating normally, and turn off the power when it is normal. <br>2. After the separation belt is adjusted to a certain number of revolutions through the frequency converter, the grain feeder works normally and the material flows into the hopper to reach 3/4, the hopper adjusting plate is adjusted to a reasonable size, the vibration feeding is adjusted, and the work starts At the time, the workload of vibration feeding need not be too large.

1, power on, check whether the operation of all parts is normal, normal after the power off.<br> 2, through the inverter will be separated belt, first adjusted to a certain number of turns, the normal work of the grain machine material flow to the pipe to reach 3/4, the pipe adjustment plate adjusted to a reasonable size, adjust the vibration feed, start work, vibration feed workload does not need to open too much.

1. Turn on the power, check whether the operation of each part is normal, and then turn off the power.<br>2. Through the frequency converter, the separation belt is adjusted to a certain number of revolutions, the grain feeder works normally, the material flows into the hopper to reach 3 / 4, the hopper adjusting plate is adjusted to a reasonable size, and the vibration feeding is adjusted. At the beginning of the work, the vibration feeding workload does not need to be too large.<br>