The compressor should be situated s

The compressor should be situated so that it has 50cm of obstacle free space around its air receiver (tank) and pump/motor unit.Ensure that the compressor draws clean airFor the correct function and longevity of your air compressor it is important that the air, which is drawn into the compressor is clean. The compressor should not be used in an area, where the air is contaminated with dust Place the compressor on flat groundEnsure that the compressor is placed on ground, which is flat and does not have an incline greater than 15o. If the compressor is placed at an angle greater than 15o in any direction, damage to the pump unit will result.Do not operate the compressor without the air filter installed.Operating the compressor without the air filter will cause severe damage to the pump unit. Cleaning Clean the items with a soft brush or a wiper moistened with a suitable biodegradable solvent. Do not use inflammable liquids like petrol or alcohol, they are a fire risk and will damage the finish and plastic parts. Ensure that the cooling fins on the pump body are kept clean. Fins, which are heavy with dust, have poor cooling properties and the compressor will over heat and damage will occur.FaultsHave the air compressor repaired by a competent person.Use only genuine replacement parts, which are available from the authorized dealer or distributor.Do not use modified or non-genuine partsMaintain air compressor with care Keep the air compressor clean for better and safer performance.Follow instructions for changing accessories. Inspect the air compressor and extension cables/hoses occasionally; have them repaired by a qualified person or authorised service body. Check for damaged parts. Do not use the air compressor with damaged parts, before further use a damaged air compressor must be carefully checked by a qualified person to determine that it will operate properly. Check for breakage of parts, mountings and other conditions that may affect its operation. An authorised service centre should properly repair a damaged part, unless indicated otherwise in the instruction manual.