根据振动评定标准，低于 0.71 的振动值为优，1.8 以内为可接受。

The evaluation criteria vibration, the vibration is preferably less than 0.71, less than 1.8 is acceptable. The vibration can be summarized as acceptable (excessive part of other process equipment and relevant site vibration) <br>, the temperature rise of the motor <br>according to the motor YE3 F insulation level, the maximum motor winding temperature to 80K, the maximum allowable temperature of 155 degrees, however, the maximum temperature of the bearing must not exceed 95 degrees, so set the maximum temperature rise of 70 degrees from the above icon to see, temperature is normal. <br>, The cabinet temperature <br>reference standard CGMA 1001.D01-2007 worm gear oil bath temperature can not exceed 95 degrees, the reducer is adapted to run between ambient temperature -20-45, setting the maximum temperature does not exceed 55 housing degrees, according to the icon displays the results, judged to be acceptable. <br>5.3 motor type test

According to the vibration assessment criteria, vibration values below 0.71 are excellent and acceptable within 1.8. This vibration can be summed up as acceptable (partialexceeding is related to vibration of other processing equipment on site)<br>, motor temperature rise<br>According to the YE3 motor F-class insulation grade, the maximum temperature of the motor winding is 80K, allowing the maximum temperature to be no more than 155 degrees, but the maximum bearing temperature is not allowed to exceed 95 degrees, so set the maximum temperature to 70 degrees, from the above icon, the temperature rise is normal.<br>, the temperature of the case<br>Referring to CGMA 1001.D01-2007 standard worm worm deceleration oil pool temperature can not exceed 95 degrees, the gearbox adapts to the ambient temperature of -20-45 between the operation, set the maximum temperature rise of the box not more than 55 degrees, according to the icon display results, determined to be qualified.<br>5.3, motor type test

According to the vibration evaluation standard, the vibration value lower than 0.71 is excellent, and within 1.8 is acceptable. This vibration can be summed up as acceptable (part of the exceeding standard is related to the vibration of other processing equipment on site)<br>. motor temperature rise<br>According to ye3 motor class F insulation grade, the maximum temperature rise of motor winding is 80K, the maximum allowable temperature is no more than 155 degrees, but the maximum temperature of bearing is not more than 95 degrees, so the maximum temperature rise is set to 70 degrees. From the above icon, the temperature rise is normal.<br>. casing temperature rise<br>According to cgma 1001.d01-2007, the maximum temperature of the oil sump of the worm gear reducer shall not exceed 95 degrees, the maximum temperature of the reducer shall be - 20-45, and the maximum temperature rise of the box shall not exceed 55 degrees. According to the result of the icon display, it is determined as qualified.<br>5.3 motor type test<br>