每个流量开关配备了5个不同长度的靶片，正常安装要求为当使用长靶片时，比

Each flow switch is equipped with 5 targets of different lengths. The normal installation requirement is that when a long target is used, all targets shorter than this target need to be installed. The purpose is to increase the strength of the target and prevent long-term operation. In the future, the target will be deformed and the detection effect will be reduced. 2. The flow switch is installed on the straight pipe, and there must be no valves, tees, elbows and other key points on the straight line that is at least 5 times the length of the pipe on both sides. Based on the company's water separator structure, it can be shortened to more than 1.5 times.

Each flow switch is equipped with 5 targets of different lengths. The normal installation requirement is that when using a long target, all targets shorter than this one need to be installed in order to increase the strength of the target, prevent deformation of the target after long-term operation, and reduce the detection effect. 2. The flow switch should be installed on a straight pipeline, and there should be at least 5 times the length of the pipeline on both sides. There should be no valves, tees, elbows, or other key components on the straight line. Based on the company's water distributor structure, it can be cut short to more than 1.5 times.

Each flow switch is equipped with five targets with different lengths. The normal installation requirement is that when using long targets, all targets shorter than this target need to be installed, in order to increase the strength of the target and prevent the target from being deformed after long-term operation and reduce the detection effect. 2. The flow switch is installed on a straight pipeline, and the straight line with at least 5 times the length of the pipeline on both sides cannot have valves, tees, bends and other keys. Based on the company's water separator structure, it can be shortened to more than 1.5 times.