当加热收缩至坡口处时，取出木衬。继续加热热收缩带，直至端部收缩紧密。当

When the heating shrinks to the groove, the wooden lining is taken out. Continue to heat the heat shrinkable tape until the ends shrink tightly. When the heat-shrinkable tape shrinks to the edge, the flame should cover the edge of the heat-shrinkable tape and heat for a few more seconds (the center of the flame is aligned with the edge, half covering the heat-shrinkable tape and half covering the coating) to make it shrink tightly to prevent warping after the fire is closed. side. Note: When heating the edge, avoid flame heating to the inside of the heat shrinkable tape to make the primer lose adhesion

当加热收缩至坡口处时，取出木衬。继续加热热收缩带，直至端部收缩紧密。当热收缩带收缩到边缘时，火焰应覆盖热收缩带的边缘多加热数秒(火焰中心对准边口，一半覆盖热收缩带一半覆盖涂层)，使之收缩紧密，防止收火后产生翘边。注：在加热边缘时，应避免火焰加热到热收缩带的内侧，使底漆失粘

When the heating shrinks to the groove, take out the wood lining. Continue to heat the heat shrinkable band until the end is tight. When the heat shrinkable belt shrinks to the edge, the flame should cover the edge of the heat shrinkable belt for several seconds (the flame center should be aligned with the edge opening, half of the heat shrinkable Belt should be covered with the coating), so as to make it shrink tightly and prevent the warping after the fire. Note: when heating the edge, the flame should not be heated to the inner side of the heat shrinkable band, so that the primer will lose adhesion<br>