技术要求：1、本生产线主要用于H型钢工件加工，工件长度范围3~12m，

技术要求：1、本生产线主要用于H型钢工件加工，工件长度范围3~12m，机床布置如图所示。2、本生产线由SAWH1050型机床和动力料道组成，可以加工1000x500mm的工件,并配备了3组侧推料装置方便快速定位。3、本生产线占地约25米，配备了8组无动力料道和3组动力料道。4、本生产线的加工基准高为800mm，上下调整尺寸范围根据客户工厂的地基情况而定。

0/5000

源语言: -

目标语言: -

结果 (英语) 1: [复制]

复制成功！

Technical requirements: 1. This production line is mainly used for processing H-shaped steel workpieces. The workpiece length range is 3~12m. The machine tool layout is as shown in the figure. 2. This production line consists of a SAWH1050 machine tool and a power feed channel, which can process workpieces of 1000x500mm. It is also equipped with 3 sets of side push devices for quick positioning. 3. This production line covers an area of about 25 meters and is equipped with 8 sets of unpowered feed lanes and 3 sets of powered feed lanes. 4. The processing reference height of this production line is 800mm, and the upper and lower adjustment range depends on the foundation conditions of the customer's factory.

正在翻译中..

结果 (英语) 2:[复制]

复制成功！

Technical requirements: 1. This production line is mainly used for processing H-shaped steel workpieces, with a length range of 3-12m. The machine tool layout is shown in the figure. 2. This production line is composed of SAWH1050 machine tool and power material channel, which can process 1000x500mm workpieces and is equipped with 3 sets of side pushing devices for convenient and fast positioning. 3. This production line covers an area of approximately 25 meters and is equipped with 8 sets of unpowered material channels and 3 sets of powered material channels. 4. The processing reference height of this production line is 800mm, and the range of adjustment dimensions is determined based on the foundation conditions of the customer's factory.

正在翻译中..

结果 (英语) 3:[复制]

复制成功！

Technical requirements: 1. This production line is mainly used for processing H-beam workpieces, the length of which ranges from 3 to 3~12m, and the layout of machine tools is as shown in the figure. 2. This production line consists of SAWH1050 machine tool and power feed channel, which can process 1000x500mm workpieces, and is equipped with three groups of side pushing devices for convenient and quick positioning. 3. This production line covers an area of about 25m and is equipped with 8 groups of unpowered runners and 3 groups of powered runners. 4. The machining datum height of this production line is 800mm, and the range of up-and-down adjustment depends on the foundation condition of the customer's factory.

正在翻译中..

其它语言

本翻译工具支持: 世界语, 丹麦语, 乌克兰语, 乌兹别克语, 乌尔都语, 亚美尼亚语, 伊博语, 俄语, 保加利亚语, 信德语, 修纳语, 僧伽罗语, 克林贡语, 克罗地亚语, 冰岛语, 加利西亚语, 加泰罗尼亚语, 匈牙利语, 南非祖鲁语, 南非科萨语, 卡纳达语, 卢旺达语, 卢森堡语, 印地语, 印尼巽他语, 印尼爪哇语, 印尼语, 古吉拉特语, 吉尔吉斯语, 哈萨克语, 土库曼语, 土耳其语, 塔吉克语, 塞尔维亚语, 塞索托语, 夏威夷语, 奥利亚语, 威尔士语, 孟加拉语, 宿务语, 尼泊尔语, 巴斯克语, 布尔语(南非荷兰语), 希伯来语, 希腊语, 库尔德语, 弗里西语, 德语, 意大利语, 意第绪语, 拉丁语, 拉脱维亚语, 挪威语, 捷克语, 斯洛伐克语, 斯洛文尼亚语, 斯瓦希里语, 旁遮普语, 日语, 普什图语, 格鲁吉亚语, 毛利语, 法语, 波兰语, 波斯尼亚语, 波斯语, 泰卢固语, 泰米尔语, 泰语, 海地克里奥尔语, 爱尔兰语, 爱沙尼亚语, 瑞典语, 白俄罗斯语, 科西嘉语, 立陶宛语, 简体中文, 索马里语, 繁体中文, 约鲁巴语, 维吾尔语, 缅甸语, 罗马尼亚语, 老挝语, 自动识别, 芬兰语, 苏格兰盖尔语, 苗语, 英语, 荷兰语, 菲律宾语, 萨摩亚语, 葡萄牙语, 蒙古语, 西班牙语, 豪萨语, 越南语, 阿塞拜疆语, 阿姆哈拉语, 阿尔巴尼亚语, 阿拉伯语, 鞑靼语, 韩语, 马其顿语, 马尔加什语, 马拉地语, 马拉雅拉姆语, 马来语, 马耳他语, 高棉语, 齐切瓦语, 等语言的翻译.