发货前，我们已经提请贵方注意，压缩机运到贵方现场后，贵方仍然需要进行以

Before delivery, we have brought your attention to your attention. After the compressor is delivered to your site, you still need to do the following: <br>    1. Cylinder inner wall, piston rod, crankshaft, connecting rod, crosshead, bearing and oil control ring assembly They are all smeared with paraffin-containing anti-rust oil and must be cleaned carefully. Otherwise, after the compressor is running, paraffin may block the lubricating oil hole and oil filter, which will affect the safe operation of the equipment. <br>    2. After cleaning the inner wall of the cylinder and the anti-rust oil on the piston rod, it must be degreased before being assembled on the compressor to ensure the safe operation of the compressor. <br>3. When installing and reinstalling, please also ask you to review all the assembly gaps in accordance with the requirements of "KFAS Oxygen Compressor Operation and Maintenance Manual" to ensure that they are within the range required by the manual and make a record. This data will also be As the basic data for future oxygen compressor maintenance.

Prior to shipment, we have brought to your attention that you will still need to do the following after the compressor has arrived at your site:<br>    1, the cylinder wall, piston rod, crankshaft, connecting rod, cross head, bearings and scraping ring components are coated with paraffin-containing rust-proof oil, must be carefully cleaned. Otherwise, after the compressor is running, paraffin may clog the lubricant holes and oil filters, affecting the safe operation of the equipment.<br>    2, cleaning the cylinder wall and piston rod rust-proof oil, must also be degreased before assembly to the compressor, to ensure the safe operation of the compressor.<br>3. When loading, please also request you to review all assembly gaps as required by the "KFAS Oxygen Compressor Operating Maintenance Instructions" to ensure that they are within the specification requirements and to make a good record, this data will also be used as the basis for future oxygen press maintenance data.

Before delivery, we have drawn your attention that after the compressor is delivered to your site, you still need to carry out the following work:<br>1. The inner wall of the cylinder, piston rod, crankshaft, connecting rod, crosshead, bearing and oil scraper ring components are coated with anti rust oil containing paraffin, which must be cleaned carefully. Otherwise, after the compressor is running, paraffin may block the lubricating oil hole and oil filter, affecting the safe operation of the equipment.<br>2. After cleaning the anti rust oil on the inner wall of the cylinder and piston rod, it must be degreased before it can be assembled on the compressor to ensure the safe operation of the compressor.<br>3. During reassembly, please review all assembly clearances according to the requirements of "operation and maintenance manual of kfas oxygen compressor" to ensure that they are within the requirements of the manual, and make records. This data will also be used as the basic data for future maintenance of oxygen compressor.<br>