Semi-automatic control: select semi-automatic control by the selection switch on the operator panel, when the machine is in place, press the start button, automatically complete a cycle of operation, after operation the machine is stopped in place. If the stop button is pressed during execution, the machine stays on that step. Press the start button again, then continue to work from this step operation, and finally still automatically stop in place, the action process has the status of each action display light and displacement, pressure detection, and the corresponding screen display data.<br>Fully automatic control: the automatic control method is selected by the selection off on the operator panel, when the machine is in place, press the start button, and the machine repeats the sequence work continuously and periodically. Until the stop button is pressed, the machine returns to its original position after the last work cycle and then shuts down. In the course of action, there are also various actions of the status display lights and displacement, pressure detection, the industry in the touch screen of the corresponding screen display data.<br>Fully automatic control: the automatic control method is selected on the operator panel, when the machine is in place, press the start button, the machine repeats the sequence of work continuously and periodically. Until the stop button is pressed, the machine returns to its original position after the last work cycle and then shuts down. During the action, there are also status display lights for each action and displacement, pressure detection, and data display in the corresponding screen of the touch screen.
正在翻译中..