1. Oil return hydraulic oil <br>filter The main function of hydraulic oil filter is to filter oil, and various impurities will inevitably appear in the hydraulic system. The main sources are: mechanical impurities remaining in the hydraulic system after cleaning, such as scale, casting sand, welding slag, iron filings, paint, paint and cotton yarn scraps, etc., and impurities that enter the hydraulic system from outside, such as through the fuel filler and Dust that enters the dust ring, etc.; impurities generated during the working process, such as the fragments formed by the hydraulic action of the seal, the metal powder generated by the relative wear of the movement, the gum, asphaltene, carbon residue, etc. generated by the oil due to oxidative deterioration . After the above-mentioned impurities are mixed into the hydraulic oil, with the circulation of the hydraulic oil, they will cause damage everywhere, which will seriously affect the normal operation of the hydraulic system, such as small gaps between relatively moving parts in the hydraulic components, as well as throttle holes and gaps. Stuck or blockage; destroy the oil film between the relative moving parts, scratch the surface of the gap, increase internal leakage, reduce efficiency, increase heat generation, aggravate the chemical action of the oil, and make the oil deteriorate. According to production statistics, more than 75% of the faults in the hydraulic system are caused by impurities mixed in the hydraulic oil. Therefore, maintaining the cleanliness of the oil and preventing the contamination of the oil are very important for the hydraulic system. The oil return hydraulic oil filter is installed on the oil return pipeline. This installation method can frequently remove impurities in the oil. In order to prevent the oil filter from being blocked, the oil can still flow back to the oil tank smoothly. Due to the low pressure of the oil return pipe, a low-strength oil filter can be used.
正在翻译中..