. Resin material : Refer the resin

. Resin material : Refer the resin list of P34E31160GM01*****<br>2. Tool steel : refer to mold safe launch report <br>3. Radius on unspecified edge should be minimized in a value of 0.1~0.2 mm.<br>4. External surface quality of flash, sink-mark(s), welding-line(s), pin-mark(s), scratch(es), <br> contamination & deformation... etc. acc. to following incoming inspection criteria for mass <br> production for TPV manufacture specification or own brand products material incoming specification<br> unless otherwise specified. In case of dispute, please refer to the sample of customer / RD signing. <br> a. TPV branded products refer to FQ SQA incoming inspection criteria SQA(PI)-001-001.<br> b. PHILIPS branded products refer to PHILIPS criteria UN-D1235 and TPV RD-ME <br> issued products document sheet_160.<br> c. SHARP branded products refer to TPV RD-ME issued products document sheet_160.<br> unspecified products refer to own brand inspection criteria.<br>5. TPV article code, molder code, mold code, UL-code, environmental symbols & L_line(5x15mm) of <br> indicator should be carved on readable area clearly.<br>6. Adjustable resin code wheel, date code wheel (year, month, day, shift-no) and others is required.<br>7. The inspection report, approved sample(s), mold drawing and schedule should be provided by <br> molder simultaneously.<br>8. Mass production upon sample approval.<br>9. No released agents allowed during injection molding process. If the process needs to use release agent, <br> the injection molding manufacturers must provide the agent sample to TPV verification and approved before use.<br>10. The article and other appendages (such as packing materials, label and other parts...) are necessary to <br> comply with RoHS requirements, TPV Technology Standard (RDEMS-01) content or its later version.<br>11. Only TPV approved green partners are allowed to supply plastic resin, ink, paint.. as business partnership. <br>12. Parting-line(s), ejector(s), resin gate(s), changeable insert(s) and molded texture refer to mold agreement <br> & mold safe launch report.<br>13. Draft angle should be less than 1¢X unless otherwise specified.<br>14. Size making including "Ellipse circle" must be measured on FAI (First article inspection) for each batch.

. Resin material : Refer the resin list of P34E31160GM01*****<br>2. Tool steel : refer to mold safe launch report <br>3. Radius on unspecified edge should be minimized in a value of 0.1~0.2 mm.<br>4. External surface quality of flash, sink-mark(s), welding-line(s), pin-mark(s), scratch(es), <br> contamination & deformation... etc. acc. to following incoming inspection criteria for mass <br> production for TPV manufacture specification or own brand products material incoming specification<br> unless otherwise specified. In case of dispute, please refer to the sample of customer / RD signing. <br> a. TPV branded products refer to FQ SQA incoming inspection criteria SQA(PI)-001-001.<br> b. PHILIPS branded products refer to PHILIPS criteria UN-D1235 and TPV RD-ME <br> issued products document sheet_160.<br> c. SHARP branded products refer to TPV RD-ME issued products document sheet_160.<br> unspecified products refer to own brand inspection criteria.<br>5. TPV article code, molder code, mold code, UL-code, environmental symbols & L_line(5x15mm) of <br> indicator should be carved on readable area clearly.<br>6. Adjustable resin code wheel, date code wheel (year, month, day, shift-no) and others is required.<br>7. The inspection report, approved sample(s), mold drawing and schedule should be provided by <br> molder simultaneously.<br>8. Mass production upon sample approval.<br>9. No released agents allowed during injection molding process. If the process needs to use release agent, <br> the injection molding manufacturers must provide the agent sample to TPV verification and approved before use.<br>10. The article and other appendages (such as packing materials, label and other parts...) are necessary to <br> comply with RoHS requirements, TPV Technology Standard (RDEMS-01) content or its later version.<br>11. Only TPV approved green partners are allowed to supply plastic resin, ink, paint.. as business partnership. <br>12. Parting-line(s), ejector(s), resin gate(s), changeable insert(s) and molded texture refer to mold agreement <br> & mold safe launch report.<br>13. Draft angle should be less than 1¢X unless otherwise specified.<br>14. Size making including "Ellipse circle" must be measured on FAI (First article inspection) for each batch.

. 树脂材料：见P34E31160GM01树脂表*****<br>2工具钢：参考模具安全启动报告<br>三。未指定边缘上的半径应最小，值为0.1~0.2 mm。<br>4闪光的外表面质量、凹陷痕迹、焊缝、销痕、划痕，<br>污染和变形。。。根据以下质量进货检验标准<br>生产第三方认可的制造规范或自有品牌产品材料进料规范<br>除非另有规定。如有争议，请参考客户/研发部签字样本。<br>a、 第三方认可品牌产品参考FQ SQA进货检验标准SQA（PI）-001-001。<br>b、 飞利浦品牌产品参考飞利浦标准UN-D1235和TPV RD-ME<br>发布产品文件表U 160。<br>c、 夏普品牌产品参考TPV RD-ME发布的产品文件表U 160。<br>未注明产品参照自有品牌检验标准。<br>5第三方认可产品代码、铸模商代码、模具代码、UL代码、环境符号和线条（5x15mm）<br>指示器应清晰地刻在可读区域。<br>6可调树脂码盘、日期码盘（年、月、日、班号）等。<br>7检验报告、批准的样品、模具图纸和时间表应由<br>同时蜕皮。<br>8样品批准后批量生产。<br>9注塑过程中不允许有脱模剂。如果需要使用脱模剂，<br>注塑制造商必须在使用前向第三方认可机构提供经第三方认可的制剂样品。<br>10物品和其他附件（如包装材料、标签和其他部件……）是<br>符合RoHS要求、TPV技术标准（RDEMS-01）或其更高版本的要求。<br>11只有经第三方认可的绿色合作伙伴才允许供应塑料树脂、油墨、油漆。。作为商业伙伴。<br>12分模线、喷射器、树脂浇口、可更换插入件和模压纹理参考模具协议<br>&模具安全启动报告。<br>13除非另有规定，拔模斜度应小于1¢X。<br>14每批产品必须在首件检验（FAI）上测量包括“椭圆圆”在内的尺寸制造。<br>