5.2 Shopfront Design1. Any unauthorized signage erected will be immediately removed by the Owner without prior notice to the Operator. All removal and reinstatement costs and expenses involved will be solely borne by the Operator.2. Any part of the shopfront, except door handle, built by the Operator shall not exceed Operator’s demise line including the 600mm recess zone under the portal. The Operator may not change or modify the bulkhead design or finishes in any way without priorwritten approval of the Owner and the Manager. Shopfronts may not be attached to the bulkhead nor be structurally dependent on use of the Owner’s framing.3. Minimum height of shopfront and bulkhead shall refer to separated drawing provided by the Owner.4. Overhead structures may be considered and approved by the Owner or the Manager based on the location.5. In case the Operator would like to erect full height shopfront glass panel, such glass should be at least 15mm thick low iron tempered clear glass. Usage of translucent or opaque glass are allowed subject to approval by the Owner or the Manager. Thickness of the glass is subject to change by the Manager without prior notice.6. For Retail Operators and F&B Operators ONLYa. No movable displays or sale fixtures will be allowed beyond the shop area unless approved by the Owner and the Manager.