备注：1、首件性能检验为破坏性试验，检验完毕后，将检验件转至性能测试报

备注：1、首件性能检验为破坏性试验，检验完毕后，将检验件转至性能测试报废区进行隔离。2、反应规则： ① 首件检验不合格，反馈至商技技术员解决问题，并对线体进行横展排查，问题解决后重新启动首件检验。 ② 当检验所使用仪器出现问题或损坏，联系车间仪器管理员交接于实验室进行检查维修，并临时采用实验室仪器用于现场首件检验。

0/5000

源语言: -

目标语言: -

结果 (英语) 1: [复制]

复制成功！

Remarks: 1. The first piece of performance inspection is a destructive test. After the inspection is completed, the inspected piece is transferred to the performance test scrap area for isolation. 2. Reaction rules: ① If the first article inspection is unqualified, feedback to the commercial technician to solve the problem, and conduct a horizontal inspection of the line body, and restart the first article inspection after the problem is solved. ② When there is a problem or damage to the instrument used in the inspection, contact the workshop instrument manager to hand over to the laboratory for inspection and maintenance, and temporarily use the laboratory instrument for the first piece inspection on site.

正在翻译中..

结果 (英语) 2:[复制]

复制成功！

Note: 1, the first performance test for destructive test, after the test is completed, the test piece will be transferred to the performance test scrap area for isolation. 2, reaction rules: (1) The first inspection is not qualified, feedback to the technical technician to solve the problem, and the line body to carry out cross-sectional inspection, after the problem is resolved to restart the first inspection. (2) When there is a problem or damage to the instrument used in the inspection, contact the workshop instrument manager to hand over to the laboratory for inspection and repair, and temporarily use laboratory equipment for the first inspection on site.

正在翻译中..

结果 (英语) 3:[复制]

复制成功！

remarks: 1. The first piece performance inspection is a destructive test. After the inspection, the inspection pieces are transferred to the performance test scrap area for isolation. 2. Reaction rules: ① If the first piece inspection is unqualified, feed it back to the commercial technician to solve the problem, and check the horizontal spread of the line body, and restart the first article inspection after the problem is solved. ② In case of any problem or damage to the instruments used in the inspection, the workshop instrument administrator shall be contacted and handed over to the laboratory for inspection and maintenance, and the laboratory instruments shall be used temporarily for the first article inspection on site.

正在翻译中..

其它语言

本翻译工具支持: 世界语, 丹麦语, 乌克兰语, 乌兹别克语, 乌尔都语, 亚美尼亚语, 伊博语, 俄语, 保加利亚语, 信德语, 修纳语, 僧伽罗语, 克林贡语, 克罗地亚语, 冰岛语, 加利西亚语, 加泰罗尼亚语, 匈牙利语, 南非祖鲁语, 南非科萨语, 卡纳达语, 卢旺达语, 卢森堡语, 印地语, 印尼巽他语, 印尼爪哇语, 印尼语, 古吉拉特语, 吉尔吉斯语, 哈萨克语, 土库曼语, 土耳其语, 塔吉克语, 塞尔维亚语, 塞索托语, 夏威夷语, 奥利亚语, 威尔士语, 孟加拉语, 宿务语, 尼泊尔语, 巴斯克语, 布尔语(南非荷兰语), 希伯来语, 希腊语, 库尔德语, 弗里西语, 德语, 意大利语, 意第绪语, 拉丁语, 拉脱维亚语, 挪威语, 捷克语, 斯洛伐克语, 斯洛文尼亚语, 斯瓦希里语, 旁遮普语, 日语, 普什图语, 格鲁吉亚语, 毛利语, 法语, 波兰语, 波斯尼亚语, 波斯语, 泰卢固语, 泰米尔语, 泰语, 海地克里奥尔语, 爱尔兰语, 爱沙尼亚语, 瑞典语, 白俄罗斯语, 科西嘉语, 立陶宛语, 简体中文, 索马里语, 繁体中文, 约鲁巴语, 维吾尔语, 缅甸语, 罗马尼亚语, 老挝语, 自动识别, 芬兰语, 苏格兰盖尔语, 苗语, 英语, 荷兰语, 菲律宾语, 萨摩亚语, 葡萄牙语, 蒙古语, 西班牙语, 豪萨语, 越南语, 阿塞拜疆语, 阿姆哈拉语, 阿尔巴尼亚语, 阿拉伯语, 鞑靼语, 韩语, 马其顿语, 马尔加什语, 马拉地语, 马拉雅拉姆语, 马来语, 马耳他语, 高棉语, 齐切瓦语, 等语言的翻译.