等截面薄壁轴承薄壁等截面轴承又叫薄壁套圈轴承,它精度高、非常安静以及承载能力很强。薄壁套圈轴承可以是深沟球轴承、四点接触轴承、角接触球轴承,的英语翻译

等截面薄壁轴承薄壁等截面轴承又叫薄壁套圈轴承,它精度高、非常安静以及承

等截面薄壁轴承薄壁等截面轴承又叫薄壁套圈轴承,它精度高、非常安静以及承载能力很强。薄壁套圈轴承可以是深沟球轴承、四点接触轴承、角接触球轴承,薄壁等截面轴承横截面大多为正方形。在这些系列中,即使是更大的轴直径和轴承孔,横截面也保持不变。这些轴承因此称为等截面。薄壁等截面轴承优点:薄壁型轴承实现了极薄型的轴承断面,也实现了产品的小型化、轻量化。产品的多样性扩展了其用途范围。薄壁等截面轴承产品特性:为了得到轴承的低摩擦扭矩、高刚性、良好的回转精度,使用了小外径的钢球。中空轴的使用,确保了轻量化和配线的空间。薄壁型6700、6800系列有各种防尘盖形式、带法兰形式、不锈钢形式、宽幅形式等,品种齐全。薄壁等截面轴承主要用途:步进电机、医疗器械、办公器械、检测仪器、减速/变速装置、工业机器人、光学/映像器械、旋转编码器。薄壁十字交叉滚子轴承:薄壁十字交叉圆柱滚子轴承内部结构采用滚子呈90°相互垂直交叉排列,单个轴承能同时承受径向力、双向轴向力与倾覆力矩的共同作用,滚子之间装有间隔保持器或者隔离块,可以防止滚子的倾斜或滚子间的相互磨察,有效防止了摩擦力矩的增加。另外,滚子垂直交叉排列的结构可以避免滚子的锁死现象;同时又因为轴承内外圈是分割的结构,间隙可调,即使被施加压力,也能获得较高的旋转精度。十字交叉滚子轴承以其轻型复合结构、回转精度高、刚性好、摩擦力矩稳定等良好的性能广泛应用于工业机器人腰部回转、关节式机器人肩部、臂、手腕等回转部位。
0/5000
源语言: -
目标语言: -
结果 (英语) 1: [复制]
复制成功!
Equal-section thin-walled bearings <br><br>Thin-walled equal-section bearings are also called thin-walled ring bearings, which have high precision, very quietness and strong bearing capacity. Thin-walled ring bearings can be deep groove ball bearings, four-point contact bearings, angular contact ball bearings, thin-walled and other cross-sectional bearings are mostly square. In these series, even with larger shaft diameters and bearing holes, the cross-section remains unchanged. These bearings are therefore called equal sections. <br><br><br>The advantages of <br><br>thin- walled and other cross-section bearings: The thin-walled bearing realizes a very thin bearing cross section, and also realizes the miniaturization and weight reduction of the product. The variety of products expands its range of uses. <br><br>Product characteristics of thin-walled and other cross-section bearings: <br><br>In order to obtain low friction torque, high rigidity and good rotation accuracy of the bearing, steel balls with small outer diameters are used. The use of hollow shafts ensures light weight and wiring space. The thin-walled 6700 and 6800 series have a variety of dust cover forms, flanged forms, stainless steel forms, and wide-width forms. <br><br>The main uses of thin-walled and other cross-section bearings: <br><br>stepper motors, medical equipment, office equipment, testing equipment, reduction / speed change devices, industrial robots, optical / imaging equipment, rotary encoders. <br><br>Thin-walled cross-roller roller bearings: The <br><br>internal structure of thin-walled cross-cylinder roller bearings uses rollers arranged at 90 ° perpendicular to each other. A single bearing can simultaneously bear the radial force, bidirectional axial force and overturning moment Spacers or spacers are installed between the rollers to prevent tilting of the rollers or mutual grinding between the rollers, which effectively prevents the increase of friction torque. <br><br><br>In addition, the vertical cross arrangement of the rollers can avoid the locking phenomenon of the rollers; at the same time, because the inner and outer rings of the bearing are divided structures, the gap is adjustable, and even if pressure is applied, high rotation accuracy can be obtained. Crossed roller bearings are widely used in industrial robots for waist rotation, articulated robot shoulders, arms, wrists and other rotating parts due to their light composite structure, high rotation accuracy, good rigidity and stable friction torque.
正在翻译中..
结果 (英语) 2:[复制]
复制成功!
Equal cross-sectional thin-walled bearings<br><br>Thin wall and other cross-sectional bearings, also known as thin-walled collar bearings, it is high-precision, very quiet and very good carrying capacity. Thin siding ring bearings can be deep trench ball bearings, four-point contact bearings, angular contact ball bearings, thin wall and other cross-sectional bearingcross are mostly square. In these series, even larger shaft diameters and bearing holes, the cross-section remains the same. These bearings are therefore called contours.<br><br>Advantages of cross-sectional bearings such as thin walls:<br><br>Thin-walled bearings achieve extremely thin bearing sections, but also to achieve the miniaturization of products, lightweight. The diversity of products extends its range of uses.<br><br>Characteristics of cross-sectional bearings such as thin walls:<br><br>In order to obtain the low friction torque, high rigidity and good swing accuracy of the bearing, a small outer diameter of steel ball is used. The use of hollow shafts ensures lightweight and wiring space. Thin-walled 6700, 6800 series has a variety of dust cover form, with flange form, stainless steel form, wide form, etc. , a full range.<br><br>Main uses of cross-sectional bearings such as thin walls:<br><br>Stepper motors, medical devices, office equipment, testing instruments, deceleration/variable speed devices, industrial robots, optical/imaging devices, rotary encoders.<br><br>Thin-walled cross-roller bearings:<br><br>The internal structure of the thin-walled cross-cylinder roller bearing is arranged vertically with the rollers of 90 degrees, and the individual bearings can simultaneously withstand the combined action of radial force, two-way axial force and tilt ingesting torque, and the spacekeeping maintainor or isolation block between the rollers can prevent the tilt or mutual grinding between the rollers, effectively preventing the increase of frictional torque.<br><br>In addition, the structure of the roller vertical cross arrangement avoids the deadlock of the roller, and because the inner and outer rings of the bearing are split structures, the gap is adjustable, and the high rotation accuracy can be obtained even if the pressure is applied. Cross-rolling bearings with its light composite structure, swing accuracy, good rigidity, frictional moment stability and other good performance is widely used in industrial robot lumbar swing, joint robot shoulder, arm, wrist and other swing parts.
正在翻译中..
结果 (英语) 3:[复制]
复制成功!
Thin wall bearing with constant section<br>The thin-walled constant section bearing is also called thin-walled ring bearing. It has high precision, very quiet and strong bearing capacity. Thin-walled ring bearings can be deep groove ball bearings, four point contact bearings, angular contact ball bearings, and the cross-section of thin-walled equal cross-section bearings are mostly square. In these series, the cross-section remains the same even for larger shaft diameters and bearing bores. These bearings are therefore called equal sections.<br>Advantages of thin-walled equal section bearing:<br>The Thin-walled bearing realizes the extremely thin bearing section, and also realizes the miniaturization and lightweight of the product. The diversity of products expands their range of uses.<br>Product characteristics of thin-walled equal section bearing:<br>In order to obtain the low friction torque, high rigidity and good rotation accuracy of the bearing, the steel ball with small outer diameter is used. The use of hollow shafts ensures lightweight and wiring space. Thin wall 6700, 6800 series have various dust cover forms, flange forms, stainless steel forms, wide forms, etc.<br>Main uses of thin-walled equal section bearing:<br>Stepping motor, medical equipment, office equipment, testing equipment, deceleration / speed change device, industrial robot, optical / imaging equipment, rotary encoder.<br>Thin cross roller bearing:<br>The internal structure of the thin-walled cross cylindrical roller bearing adopts the roller arranged in 90 ° mutually vertical cross arrangement. A single bearing can bear the combined action of radial force, bidirectional axial force and overturning moment at the same time. The roller is equipped with a spacing retainer or isolation block, which can prevent the inclination of the roller or the mutual abrasion between the rollers, and effectively prevent the increase of friction moment.<br>In addition, the roller vertical cross arrangement structure can avoid the roller locking phenomenon; at the same time, because the bearing inner and outer rings are divided structure, the gap can be adjusted, even if the pressure is applied, it can also obtain high rotation accuracy. Because of its light composite structure, high rotation accuracy, good rigidity and stable friction torque, cross roller bearing is widely used in the waist rotation of industrial robots, shoulder, arm, wrist and other rotating parts of articulated robots.<br>
正在翻译中..
 
其它语言
本翻译工具支持: 世界语, 丹麦语, 乌克兰语, 乌兹别克语, 乌尔都语, 亚美尼亚语, 伊博语, 俄语, 保加利亚语, 信德语, 修纳语, 僧伽罗语, 克林贡语, 克罗地亚语, 冰岛语, 加利西亚语, 加泰罗尼亚语, 匈牙利语, 南非祖鲁语, 南非科萨语, 卡纳达语, 卢旺达语, 卢森堡语, 印地语, 印尼巽他语, 印尼爪哇语, 印尼语, 古吉拉特语, 吉尔吉斯语, 哈萨克语, 土库曼语, 土耳其语, 塔吉克语, 塞尔维亚语, 塞索托语, 夏威夷语, 奥利亚语, 威尔士语, 孟加拉语, 宿务语, 尼泊尔语, 巴斯克语, 布尔语(南非荷兰语), 希伯来语, 希腊语, 库尔德语, 弗里西语, 德语, 意大利语, 意第绪语, 拉丁语, 拉脱维亚语, 挪威语, 捷克语, 斯洛伐克语, 斯洛文尼亚语, 斯瓦希里语, 旁遮普语, 日语, 普什图语, 格鲁吉亚语, 毛利语, 法语, 波兰语, 波斯尼亚语, 波斯语, 泰卢固语, 泰米尔语, 泰语, 海地克里奥尔语, 爱尔兰语, 爱沙尼亚语, 瑞典语, 白俄罗斯语, 科西嘉语, 立陶宛语, 简体中文, 索马里语, 繁体中文, 约鲁巴语, 维吾尔语, 缅甸语, 罗马尼亚语, 老挝语, 自动识别, 芬兰语, 苏格兰盖尔语, 苗语, 英语, 荷兰语, 菲律宾语, 萨摩亚语, 葡萄牙语, 蒙古语, 西班牙语, 豪萨语, 越南语, 阿塞拜疆语, 阿姆哈拉语, 阿尔巴尼亚语, 阿拉伯语, 鞑靼语, 韩语, 马其顿语, 马尔加什语, 马拉地语, 马拉雅拉姆语, 马来语, 马耳他语, 高棉语, 齐切瓦语, 等语言的翻译.

Copyright ©2024 I Love Translation. All reserved.

E-mail: