The suction chamber of the centrifu

The suction chamber of the centrifugal pump means the overflow part of the pump body from the inlet line of the pump to the inlet of the impeller. The design of the suction chamber affects the anti-cavitation characteristics of the pump.<br>According to the shape of the suction chamber, it can be divided into three types: conical suction chamber, round suction chamber and spiral suction chamber. This time the suction chamber receives the suction chamber of the conical tube. As shown in the figure, the conical chamber suction chamber is widely used in single-stage cantilever centrifugal pumps. The inlet diameter is the same, the inlet diameter is 7% ~ 10% larger than the outlet diameter, and the economic inlet flow is about 3 m / s, the allowable cone is such that the size of the suction chamber can be determined . ,,

离心泵的吸气室是指泵体从泵入口管路到叶轮入口的溢出部分。吸气室的设计影响泵的抗气穴特性。<br>根据吸气室的形状，可分为三种类型：圆锥吸室、圆形吸气室和螺旋吸气室。这一次，吸气室接收锥形管的吸气室。如图所示，锥形室吸气室广泛用于单级悬臂离心泵。进气直径相同，进气直径比出气口直径大7%~10%，而经济进气流量约为3米/s，允许的锥体可以确定吸气室的大小。,,

离心泵的吸入室是指泵体从泵的进口管路到叶轮进口的溢流部分。吸入室的设计影响泵的抗汽蚀性能。<br>根据吸入室的形状，可分为三种类型：锥形吸入室、圆形吸入室和螺旋形吸入室。此时，吸入室接收锥形管的吸入室。如图所示，锥形室吸入室广泛应用于单级悬臂离心泵。进口直径相同，进口直径比出口直径大7%～10%，经济进口流量约3m/s，允许锥度可确定吸入室的尺寸。,,<br>