1.1 外观注塑件出现的沙粒异色点 两处相距50mm且不聚集 2点≤0

1.1 The appearance of the sand particles of the colored parts is 50mm away from each other and does not gather 2 points ≤0.75 grade 2 points ≤0.75 grade 3 points ≤1.3 grade <br>1.2 The appearance of the injection molded parts has blunt bruises or impact marks two places 50mm apart and no aggregation level 2:00 2:00 ≤1.0 ≤1.0 ≤1.0 stage 3:00 <br>1.3 scratch the surface appearance of the injection molded three scratched 50mm apart and not aggregated at two 3 2 2 <br>1.4 Exterior surface scratches two molded parts Scratches two places 50mm apart and does not gather 1 place 1 place 2 places <br>1.5 Appearance scratches on the surface of the injection molded part One-level scratches Two places 50mm apart and does not gather 0 places 0 places 1 place <br>1.6 The visible part of the injection molded part is dirty and can be wiped 60cm There are 1 place, 1 place, 2 places <br>1.7 The visible part of the injection molded part is dirty and cannot be wiped. It can be seen at 60 cm. 0 place 0 place 0 place <br>1.8 Appearance of dents and bumps on the injection molded part. The two places are 50 mm apart and do not gather. ≤1.0 level 2 places ≤1.0 level <br>1.9 Appearance deformation flatness of injection molded parts ≤0.5mm ≤0.5mm ≤0.5mm

1.1 外观注塑件出现的沙粒异色点 两处相距50mm且不聚集 2点≤0.75级 2点≤0.75级 3点≤1.3级<br>1.2 外观注塑件出现钝性碰伤或撞击痕迹 两处相距50mm且不聚集 2点≤1.0级 2点≤1.0级 3点≤1.0级<br>1.3 外观注塑件表面划伤 三级划伤 两处相距50mm且不聚集 2处 2处 3处<br>1.4 外观注塑件表面划伤 二级划伤 两处相距50mm且不聚集 1处 1处 2处<br>1.5 外观注塑件表面划伤 一级划伤 两处相距50mm且不聚集 0处 0处 1处<br>1.6 注塑件可视部分脏污可擦拭 60cm处可见 1处 1处 2处<br>1.7 注塑件可视部分脏污不可擦拭 60cm处可见 0处 0处 0处<br>1.8 外观注塑件出现凹痕凸点 两处相距50mm且不聚集 1处≤1.0级 1处≤1.0级 2处≤1.0级<br>1.9 外观注塑件变形 平整度 ≤0.5mm ≤0.5mm ≤0.5mm

1.1 the distance between the two sand discoloration points of the appearance injection molding part is 50mm, and the two points are not aggregated, 2 points ≤ 0.75 grade, 2 points ≤ 0.75 grade, 3 points ≤ 1.3 grade<br>1.2 the distance between two blunt bruises or impact marks of the external injection molded parts is 50mm and the two points are not clustered, 2 points ≤ 1.0, 2 points ≤ 1.0, 3 points ≤ 1.0<br>1.3 the surface of the injection molding part is scratched three times, two places are 50 mm apart and two places are not gathered, two places are scratched three places<br>1.4 the surface of the external injection molding part is scratched twice, two places are 50mm apart and one place is not clustered, one place is scratched twice<br>1.5 appearance: the surface of injection molded parts is scratched at the first level, two places are 50mm apart and 0 place is not clustered, one place is 0 place<br>1.6 the visible part of the injection molding part is dirty and can be wiped 60 cm away, 1 visible part, 1 visible part, 2 visible parts<br>1.7 the visible part of the injection molding part is dirty and can't be wiped. 0 is visible at 60cm and 0 is visible at 0<br>1.8 the distance between the two concave and convex points of the appearance injection molded parts is 50mm, and the distance between them is no more than 1.0 level, 1 place ≤ 1.0 level, 2 places ≤ 1.0 level<br>1.9 deformation flatness of appearance injection molded parts ≤ 0.5mm ≤ 0.5mm ≤ 0.5mm