NOTE 1—For bushings, see Figure 5 and Figure 7. NOTE 2—Dimensions: mm/in; mm . inNOTE 3—∆–Alphabetical dimensional identification. NOTE 4—Dimension A is the minimum length of 0.500 ± 0.003 (12.70 mm ± 0.007 mm) diameter contact. Conductive probe segment shown. NOTE 5—Conductive or nonconductive cuff optional. NOTE 6—Manufacturer should be contacted regarding interchangeability of caps without probes. Caps without probes may not meet the corona extinction levels of this standard when mated with certain bushing designs. Figure 15 —Insulated cap for 200 A loadbreak interface, 8.3 kV and 15.2 kV