1.2 真空吸盘架与下料料车复合集成在一起，上料真空吸盘架配套12组重

1.2 The vacuum suction cup holder is integrated with the unloading truck. The feeding vacuum suction cup holder is equipped with 12 sets of heavy-duty vacuum suction cups, which are suitable for sheets with a maximum size of 1.5M*3M, a minimum size of 0.8M*0.8M, and a full-width rated load of 700kg. The feeding method is a left and right double fork structure, the running distance of the feeding fork is short, and the failure rate is low. The opening and closing of the blanking fork is driven by an electromagnetic brake motor, and the double-fork extended linear guideway opens and closes synchronously in both directions. The material fork is made of high-strength steel after heat treatment, hard chrome plating on the surface and then polished. The surface is smooth, the contact area with the plate is small, and the plate is not scratched. Large bearing capacity and strong deformation resistance. The full-width maximum load is 400kg.

1.2 the vacuum suction cup frame is integrated with the unloading car. The loading vacuum suction cup frame is equipped with 12 groups of heavy-duty vacuum suction cups, which is suitable for the maximum width of the plate of 1.5m * 3M, the minimum width of 0.8m * 0.8m, and the rated load of the full width of 700kg. The blanking mode is left and right double fork structure, with short operation distance and low failure rate. The opening and closing of the blanking fork is driven by the electromagnetic braking motor. The double fork extends the linear guide rail to open and close synchronously in two directions. The fork support plate is configured to make the operation of the fork stable without shaking. The material fork is made of high-strength steel, which is polished after heat treatment and hard chromium plating on the surface. The surface is smooth, the contact area with the plate is small, and the plate is not scratched. Large bearing capacity and strong deformation resistance. The maximum load of full width is 400kg.

1.2 The vacuum chuck frame is integrated with the blanking car, and the feeding vacuum chuck frame is equipped with 12 sets of heavy-duty vacuum chucks, which are suitable for the maximum width of the plate 1.5M*3M, the minimum width 0.8M*0.8M, and the rated bearing capacity of the full width 700kg. The blanking mode is left and right fork structure, with short running distance and low failure rate. The opening and closing of the blanking fork is driven by the electromagnetic brake motor, and the double-fork linear guide rail opens and closes synchronously in both directions. The fork supporting plate is equipped to make the fork run stably without shaking. The fork is made of high-strength steel after heat treatment, hard chromium plating on the surface and polishing. The surface is smooth, the contact area with the plate is small, and the plate is not scratched. Large bearing capacity and strong deformation resistance. The maximum bearing capacity of full width is 400kg.