设置搅拌轴:机械搅拌发酵罐及其它部分在轴上的所有力都设置在部分轴套的中间;除扭矩的作用外,搅拌轴上液体的径向力和重心质量的组合产生的离心力应的英语翻译

设置搅拌轴:机械搅拌发酵罐及其它部分在轴上的所有力都设置在部分轴套的中

设置搅拌轴:机械搅拌发酵罐及其它部分在轴上的所有力都设置在部分轴套的中间;除扭矩的作用外,搅拌轴上液体的径向力和重心质量的组合产生的离心力应考虑搅拌轴和机械搅拌发酵罐。与本设计联轴器连接的可拆卸轴可视为整体轴。通过这些设置,我们可以将悬臂轴的力简化为简单支撑的梁。
0/5000
源语言: -
目标语言: -
结果 (英语) 1: [复制]
复制成功!
Setting the stirring shaft: all the forces on the shaft of the mechanical stirring fermenter and other parts are set in the middle of the part of the sleeve; in addition to the effect of torque, the centrifugal force generated by the combination of the radial force of the liquid on the stirring shaft and the center of gravity mass should be considered Stirring shaft and mechanical stirring fermentor. The detachable shaft connected with the coupling of this design can be regarded as an integral shaft. With these settings, we can reduce the force of the cantilever shaft to a simply supported beam.
正在翻译中..
结果 (英语) 2:[复制]
复制成功!
Set the mixing shaft: all forces in the mechanical mixing fermentation tank and other parts of the shaft are arranged in the middle of the partial bushing, in addition to the role of torque, the combination of the radial force of the liquid on the mixing shaft and the centrifugal force produced by the quality of the center of gravity should be considered the stirring shaft and the mechanical stirring fermentation tank. The removable shaft connected to this design coupling can be considered as a whole shaft. With these settings, we can reduce the force of the cantilever shaft to a simple support beam.
正在翻译中..
结果 (英语) 3:[复制]
复制成功!
Setting the mixing shaft: all the forces on the shaft of the mechanical mixing fermentation tank and other parts are set in the middle of the shaft sleeve; in addition to the effect of torque, the centrifugal force generated by the combination of the radial force of the liquid on the mixing shaft and the mass of the center of gravity shall consider the mixing shaft and the mechanical mixing fermentation tank. The detachable shaft connected with the coupling of this design can be regarded as an integral shaft. With these settings, we can simplify the force on the cantilever axis to simply supported beams.<br>
正在翻译中..
 
其它语言
本翻译工具支持: 世界语, 丹麦语, 乌克兰语, 乌兹别克语, 乌尔都语, 亚美尼亚语, 伊博语, 俄语, 保加利亚语, 信德语, 修纳语, 僧伽罗语, 克林贡语, 克罗地亚语, 冰岛语, 加利西亚语, 加泰罗尼亚语, 匈牙利语, 南非祖鲁语, 南非科萨语, 卡纳达语, 卢旺达语, 卢森堡语, 印地语, 印尼巽他语, 印尼爪哇语, 印尼语, 古吉拉特语, 吉尔吉斯语, 哈萨克语, 土库曼语, 土耳其语, 塔吉克语, 塞尔维亚语, 塞索托语, 夏威夷语, 奥利亚语, 威尔士语, 孟加拉语, 宿务语, 尼泊尔语, 巴斯克语, 布尔语(南非荷兰语), 希伯来语, 希腊语, 库尔德语, 弗里西语, 德语, 意大利语, 意第绪语, 拉丁语, 拉脱维亚语, 挪威语, 捷克语, 斯洛伐克语, 斯洛文尼亚语, 斯瓦希里语, 旁遮普语, 日语, 普什图语, 格鲁吉亚语, 毛利语, 法语, 波兰语, 波斯尼亚语, 波斯语, 泰卢固语, 泰米尔语, 泰语, 海地克里奥尔语, 爱尔兰语, 爱沙尼亚语, 瑞典语, 白俄罗斯语, 科西嘉语, 立陶宛语, 简体中文, 索马里语, 繁体中文, 约鲁巴语, 维吾尔语, 缅甸语, 罗马尼亚语, 老挝语, 自动识别, 芬兰语, 苏格兰盖尔语, 苗语, 英语, 荷兰语, 菲律宾语, 萨摩亚语, 葡萄牙语, 蒙古语, 西班牙语, 豪萨语, 越南语, 阿塞拜疆语, 阿姆哈拉语, 阿尔巴尼亚语, 阿拉伯语, 鞑靼语, 韩语, 马其顿语, 马尔加什语, 马拉地语, 马拉雅拉姆语, 马来语, 马耳他语, 高棉语, 齐切瓦语, 等语言的翻译.

Copyright ©2024 I Love Translation. All reserved.

E-mail: