首先谢谢你对我报价单的仔细阅读。 但是我不得不说刚开始的确实是仅供参考

First of all, thank you for your careful reading of my quotation. But I have to say that the beginning is really just for reference, the general price will be lower than the actual price to attract customers. If you take the reference price list for 2200 US dollars, it is unfair, and I do not know how your data came from. I have explained this in every email, but this is indeed the case, and I have not avoided your question. <br><br>You quoted the actual demand, 100m, 130-110mm, because you are indeed a buyer. In order to express my sincerity, I also changed the drilling tool of the configuration list according to your demand at the price of 13410 US dollars. Later, I applied to the company for $ 300 less. In the quotation, I did not write 60 or 60 meters, you may remember it wrong. Regarding 80-50, I did neglect. The unit of 80 in the original quotation was meter, but although I wrote you the actual quotation is also meter, but the calculation is based on the price of 50, 2 meters, the actual The price is 100 meters. This is bothering you, sorry. <br><br>The quality of the drill tool will be different. The mud pump is divided into two cylinders and three cylinders. I will give you three cylinders, and the ability will be stronger. Drill bits are also divided into rigid teeth. Although they are drill rods of the same specifications, different manufacturers have different raw materials and different quality.

First of all, thank you for your careful reading of my quotation. But I have to say that the beginning is really for reference only, the general price will be quoted below the actual price to attract customers. It's not fair if you get $2,200 from a reference quote, and I really don't know how your data came about. I have an explanation every time I email, but it is, and I am not shying away from your question.<br><br>You reported the actual demand, 100m, 130-110mm, because you are indeed a buyer, in order to express good faith, I also in accordance with the price of 13410 U.S. dollars to you, only in accordance with your needs to change the configuration of the single drill. He later applied to the company for $300 less. In the quotation, I didn't write 60 or 60 meters, you may have mistakenly. About 80-50, I did neglect, the original quotation 80 units are meters, but although I give you the actual quotation written is also rice, but the calculation is in accordance with 50, 2 meters a calculation price, the actual price is 100 meters. This is a problem for you, I'm sorry.<br><br>The quality of the configuration of the drill will be different, mud pump has two cylinders three cylinders, I give you a three-cylinder, the ability will be stronger. Drill bit is also set teeth, although are the same specifications of the drill pipe, but different manufacturers of raw materials, quality will be different.

First of all, thank you for reading my quotation carefully. But I have to say that at the beginning it was just for reference. Generally, the price will be lower than the actual price to attract customers. If you get $2200 from the reference quotation, it's unfair, and I really don't know how you got this data. I've explained this in every email, but it's true. I didn't avoid your questions.<br>You have reported the actual demand, 100m, 130-110mm, because you are really a buyer. In order to express your sincerity, I also changed the drilling tools in the configuration list according to the price of 13410 US dollars. Later, I applied with the company for $300 less. I didn't write 60 pieces or 60 meters in the quotation. You may have got it wrong. As for 80-50, I did neglect that the unit of 80 in the original quotation is meter, but I wrote the actual quotation for you is also meter, but I calculated the price based on 50 pieces, 2 meters one piece, and the actual price is 100 meters. I'm sorry to bother you.<br>The quality of the drilling tools will be different. There are two cylinders and three cylinders in the mud pump. I have three cylinders for you, which is more powerful. The drill bit is also divided into two parts, i.e. the drill pipe of the same specification, but the raw materials of different manufacturers are different and the quality is different.<br>