1.设备操作不便，设备在右侧，能正常紧固右侧螺钉，但是紧固左侧螺钉的时

1. The equipment is inconvenient to operate. The equipment is on the right side and the right screw can be tightened normally. However, when tightening the left screw, it requires a lot of force to pull it over. 2. The length of the sleeve does <br>not meet the loading standards and the actual car process distance About 15cm, but the sleeve length is only 5cm <br>3. The equipment sleeve is too thick, about 3.5cm, and the part process is 3.8cm. In actual production, alignment is performed while moving, and the accuracy requirements are too high.

1. The equipment is inconvenient to operate. It is on the right side and can be tightened normally. However, when tightening the left screw, it requires a lot of force to pull it over<br>2. The length of the sleeve does not meet the loading standard, and the actual vehicle process distance is about 15cm, but the sleeve length is only 5cm<br>3. The equipment sleeve is too thick, about 3.5cm, and the part process is 3.8cm. In actual production, alignment is carried out while moving, which requires too high accuracy

1. The equipment is inconvenient to operate. The equipment is on the right side, and the right screw can be tightened normally. However, when tightening the left screw, it takes a lot of force to pull it over.<br> 2. The length of the sleeve does not meet the loading standard, and the process distance of the actual car is about 15cm, but the sleeve length is only 5cm.<br> 3. The equipment sleeve is about 3.5cm thick, and the part technology is 3.8cm. In actual production, the alignment is carried out under the condition of moving, which requires too high accuracy.