方脉脉冲下面的绞龙和关风器 ，每天上班前需第一个打开，让它先工作10分

The screw auger and the wind shutoff device under the square pulse pulse need to be turned on first before going to work every day. Let it work for 10 minutes before turning on the fan and the controller on the pulse to make the solenoid valve above work. The last one is required every time after get off work. Turn off the auger and the fan below to ensure that the ash in the auger is discharged in time every day and will not accumulate in it. If there is too much ash inside, it should be cleaned regularly to prevent the auger from getting stuck and the fan to be blocked!

The strands and wind shutters below the square pulse, every day before going to work need to be the first to open, let it work for 10 minutes before opening the fan and pulse on the control instrument to let the above solenoid valve work, each time after work to the last off the hanger and off the fan, so as to ensure that the ash in the hangers in time to discharge, will not accumulate in it, such as too much gray inside, to regularly clean up, to prevent the hang dragon stuck, off the fan block!

Twister and wind breaker under square pulse Before going to work every day, you need to turn on the fan first, let it work for 10 minutes, then turn on the fan and the control instrument on the pulse, let the upper solenoid valve work, and turn off the winch and fan at the last time after going to work every time, so as to ensure that the ash in the winch can be discharged in time every day and will not accumulate in it. If there is too much ash in the winch, you need to clean it regularly to prevent the winch from jamming and turn off the fan Die!