示廓灯与线束插接到位后不亮；按紧插头时灯亮，松手后熄灭。分析为灯与插头

The profile light and the wire harness do not light after being inserted into place; the light comes on when the plug is pressed tightly, and goes out after releasing the hand. The analysis is that the lamp is not in proper contact with the plug. <br>When the door control switch is sub-assembled, all four mounting holes are not snapped into the nut. The impact force of the pneumatic tool is strong, resulting in deformation of the nut seat.

The profile light and the harness are not lit when plugged in, the light is on when the plug is pressed and the hand is turned off. The analysis is that the light and plug contact is not true.<br>The door control switch was not divided into the nut all four mounting holes, the pneumatic tool impact force is strong, resulting in the nut seat deformation.

The clearance lamp does not light up when it is connected with the harness in place; the lamp lights up when the plug is pressed tightly, and goes out when the plug is released. It is analyzed that the contact between the lamp and the plug is not true.<br>When the door control switch is assembled separately, the four mounting holes are not all clamped into the nuts. The impact force of the pneumatic tools is strong, resulting in the deformation of the nut seat.<br>