4、脱皮机 经清理过的原粮喂入料斗，调节手轮，当听到磨头与磨芯稍微有

4. <br> Feed the cleaned raw grain into the hopper of the peeling machine, adjust the hand wheel, and slowly open the unloading gate when you hear a slight grinding sound between the grinding head and the grinding core. At this time, do not keep your hands away from the adjusting hand wheel for the time being. Depending on the situation, adjust the tightness until you are satisfied with the peeling effect of the product. When the processing is about to be completed, the adjustment handle should be adjusted to bring the grinding core to the separated state. It is normal for the grinding head to occasionally collide when the machine is idle for a moment before and after it is stopped. Idling is strictly prohibited when it is in working condition.

4. Peeling machine<br>Feed the cleaned raw grain into the hopper, adjust the handwheel, and slowly open the feeding gate when there is a slight grinding sound between the grinding head and the grinding core. At this time, do not keep your hands away from the adjusting handwheel for the time being. Adjust the tightness according to the peeling situation until the product peeling effect is satisfactory. When the machining is about to be completed, the adjustment handle should be adjusted to bring the grinding core to a separate state. It is normal for the grinding head of this machine to accidentally collide during the moment of no-load before and after shutdown. It is strictly prohibited to idle when in working condition.

4. Peeling machine<br> Feed the cleaned raw grain into the hopper, adjust the handwheel, and slowly open the blanking gate when you hear a slight running-in sound between the grinding head and the grinding core. At this time, keep your hands away from the adjusting handwheel temporarily, and adjust the tightness according to the peeling situation until the peeling effect of the product is satisfactory. When the machining is about to be completed, the adjusting handle should be adjusted to make the grinding core separate. It is normal that the grinding head occasionally collides at the moment of no load before and after the machine stops, and idling is strictly prohibited when it is in working condition.