1.模具上的销子今后一律更改为Ø2.13，并定期更换；2.抛光后孔内的

1. The upper mold pin all future changes to Ø2.13, and periodic replacement; <br>good hole cleaning before 2. dust after polishing and electroplating polishing wax, to prevent clogging; <br>3. The current plating thickness is not adjusted, so as not to affect the salt spray test; <br>censoring employed before shipment 2.03 4. 100% seizure!

1. The pins on the mold will be changed to 2.13 in the future, and are replaced regularly;<br>2. Dust and polished wax in the post-polishing hole before plating to clean up, to prevent clogging;<br>3. At present, the thickness of the plating process is not adjusted, so as not to affect the salt mist test;<br>4. The final inspection before shipment adopts 2.03 inspection tools 100% through!

1. The pins on the mould will be changed to "2.13" in the future and replaced regularly;<br>2. Clean the dust and polishing wax in the hole after polishing before electroplating to prevent blocking;<br>3. At present, the plating process thickness is not adjusted to avoid affecting the salt spray test;<br>4. The final inspection before shipment is 100% passed with 2.03 inspection tool!<br>