对于环形工件，带曲率试块与平面试块调整的灵敏度差异很大，尤其是凹面检测

For ring-shaped workpieces, the sensitivity of the adjustment between the curvature test block and the flat test block is very different, especially when detecting concave surfaces. . Even if the use of flat test blocks is permitted from a standard point of view, it is recommended to pay attention to the compliance of critical records and acceptance limit signals, because the purchaser may use curved test blocks for sensitivity adjustment during re-inspection.

For ring workpieces, the sensitivity of the curvature test block and the flat interview block adjustment is very different, especially when concave detection. Even if the use of flat interview blocks is permitted from a standard perspective, it is recommended to focus on the compliance of critical records and acceptance limit signals, as the buyer's retest ingressis may be sensitively adjusted using the curved interview block.

For the ring workpiece, the sensitivity of curvature test block and plane test block is very different, especially for concave surface detection.. Even if the use of planar test blocks is permitted from a standard point of view, it is recommended to pay attention to the compliance of critical records and acceptance limit signals, since it is possible for the purchaser's re inspection to use curved blocks for sensitivity adjustment.<BR>