本机工作时，当准备工作(除尘系统、分离器、提升机、纵向螺旋输送器、横向

When the unit is operating, when the preparations (dust removal system, separator, elevator, vertical screw conveyor, the transverse screw conveyor, roller, or the like blasting operation) is completed, the machine begins to work normally. First, in vitro chamber workpiece on the roller conveyor, the conveying roller by shot blasting into the chamber, then the shutter opens for the pills, shot blasting the workpiece has started, cleared, close the gate for the pills, workpiece roller conveyor a chamber in vitro.

When the machine is working, the machine starts to work properly when the preparation (dust removal system, separator, lifter, vertical spiral conveyor, transverse spiral conveyor, roller, projectile, etc.) is complete. First of all, in the outside of the room will be placed on the roller road, through the roller channel transport into the blast cleaning room, at this time open the pill gate, began to the workpiece to clean up the projectile, clean up, close the supply of the pill gate, the workpiece through the roller channel to transport out of the room outside.

When the machine is working, when the preparatory work (dust removal system, separator, elevator, longitudinal auger, transverse auger, roller table, shot blasting machine, etc.) is completed, the machine starts to work normally. First of all, place the workpiece on the roller table outside the chamber and transport it into the shot blasting room through the roller table. At this time, open the shot feeding gate and start to clean the workpiece. After cleaning, close the shot feeding gate and transport the workpiece out of the chamber through the roller table.<br>