1.按照“标贴打印规范要求”逐项检查，勾选检险结果“符合”、“不符合”

1.按照“标贴打印规范要求”逐项检查，勾选检险结果“符合”、“不符合”或“NA”（不涉及时勾选“NA”）,若有一项自检结果判“不符合”，后的自检结论判“FALL”；<br>2.重打标贴需以旧换新或确认后打印，按照标贴正常流程产生记录；<br>3.标贴打印员依据“工艺流程卡、销售订单”计算实际需要打印的标贴数量。<br>留样标贴粘贴在以下框内:

1. Check item by item according to the "Label Printing Specification Requirements", check the "Compliant", "Non Compliant" or "NA" inspection results (if not involved, check "NA"). If one self inspection result is judged as "Non Compliant", the subsequent self inspection conclusion is judged as "FALL";<br>2. To reprint the label, it is necessary to replace it with a new one or confirm it before printing, and generate a record according to the normal labeling process;<br>3. The label printer calculates the actual number of labels to be printed based on the "process card, sales order".<br>Stick the sample label in the following boxes:

1. Check item by item according to the requirements of label printing specifications, and check the results of risk inspection as "Conformity", "Nonconformance" or "NA" (if it is not involved, check "NA"). If one self-inspection result is judged as "Nonconformance", the subsequent self-inspection conclusion will be judged as "Fall";<br> 2. Re-printing labels should be printed with old ones or confirmed, and records should be generated according to the normal flow of labels;<br> 3. The label printer calculates the actual number of labels to be printed according to the "process card and sales order".<br> The sample retention label is pasted in the following box: