Once the Zopt and the impedance mat

一旦确定了Zopt和阻抗匹配，下一步便是提出一个实用的匹配和滤波拓扑，并使用Agilent ADS和Ansoft Designer等工具来模拟理论值。<br>阻抗匹配阶段的目标是当匹配到50欧姆时为SX1261 / SX1262 PA提供最佳的负载阻抗。为了使匹配网络的组件数量最少，这将使用TX级的L3和C5完成。

Once the Zopt and the impedance matching have been identified, the next steps would be to come up with a practical matching and filtering topology, and simulate the theoretical values by using tools such as Agilent ADS and Ansoft Designer.<br>The goal of the impedance matching stage is to present the optimum load impedance to the SX1261/SX1262 PA when matched to 50 ohms. In order to minimize the number of components for the matching network, this will be done using L3 and C5 of the TX stage.

一旦确定了Zopt和阻抗匹配，下一步将是提出一个实用的匹配和滤波拓扑，并使用Agilent ADS和Ansoft Designer等工具模拟理论值。<br>阻抗匹配级的目标是当匹配到50欧姆时，向SX1261/sx162pa呈现最佳负载阻抗。为了最小化匹配网络的组件数量，这将使用TX级的L3和C5来完成。